Eizo CG241W manual Default settings, Beeper settings, Dimensions

Page 33

5. Reference

Default settings

Brightness		37%
Smoothing		3
Temperature		6500K
FineContrast Mode		Custom
PowerManager		Analog input : VESA DPMS
		Digital input:DVI DMPM
Screen Size		Full
Input Priority		1
Off Timer		Disable
Menu Settings	Menu Size	Normal
	Menu Off Timer	45 seconds
BrightRegulator		Disable
Beep		On
Language		English
Signal Selection		Normal

Beeper settings

Short beep	Adjustment menu item selsected.
	Adjustment menu parameter adjusted to minimum or maximum limit.
	pressed
	When locked or unlocked with
Long beep	pressed
	Adjustment menu data-save executed.
4 short beeps	Monitor not connected correctly.
	PC turned off.
	Monitor received unsupported signal frequency.
2 short beeps every 15 sec.	Monitor is in the advance notice mode of the Off Timer.

The power will be off within ﬁfteen minutes.

Dimensions

��

��

mm(inch)

��

��

��

��

��

��

��

��

��

��	��
��	��
	��

��

��

��

��

��

��

��

��

��

��

��

��

��

33

Image 33

Contents APPENDIX/ANHANG/ANNEXE Safety Symbols Location of the Caution Statements Refer all servicing to qualiﬁed service personnelDo not open the cabinet or modify the unit Keep small objects or liquids away from the unitHandle the power cord with care To disconnect the power cord, grasp the plug ﬁrmly and pullNever touch the plug and power cord if it begins to thunder Place the unit at the strong and stable placePeriodically clean the area around the plug Use an easily accessible power outletUnplug the unit before cleaning it Do not touch a damaged LCD panel directly with bare handsLCD Panel Introduction FeaturesIndicator status Operation status Buttons and IndicatorsDisk contents and software overview Utility DiskTo use ColorNavigator CE or UniColor Pro Connecting Two PCs to the Monitor Selecting input signalConnection examples Priority setting Performance Required system environment Making Use of USB Universal Serial BusBasic Operation and Functions Making Adjustments and SettingsEntering the ScreenManager Exiting the ScreenManagerMain menu Sub menu Reference FunctionsScreen Adjustment Adjustment Procedure Press on the control panelRun the Screen Adjustment Program Adjust by using Screen menu in the ScreenManager Adjust the output signal range Dynamic Range of the signal To select FineContrast mode Color AdjustmentFineContrast Mode Color Adjustment of the Mode SettingsIcons Functions FineContrast Mode Custom SRGB Adjustment ItemsBrightness To set the brightness of the screen ~100% Procedure Power-save SetupPower Saving System Power Resumption ProcedureLocking the settings Off TimerHow to lock How to unlockAutomatic brightness adjustment Power Indicator SettingEnlarge the screen size when displaying a low resolution Displaying Lower ResolutionsMode Function Smooth the blurred texts of the enlarged screenEizo Logo Appearing Function Setting the orientation of the Adjustment menuTo undisplay To displayProblems Possible cause and remedy TroubleshootingPosition adjustment Refer to the manual of the PC Attach an arm stand to the LCD monitor securely Attaching an arm Restart the computer if the settings have been changed Environmental Settings Digital signals onlyCleaning CabinetLCD Panel USB SpeciﬁcationsDefault settings Beeper settingsDimensions Pin No Signal Signal RemarksPin Assignment Glossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGBAPPENDIX/ANHANG/ANNEXE APPENDIX/ANHANG/ANNEXE For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie