CHAPTER 2
Installation
Inspecting the Equipment
If any FALCON® equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of the equipment; 2) Send a copy of the damage claim within 15 days to the Falcon® Service Department.
UPS Setup
1.Verify that the following is included in the UPS shipping carton: UPS, Software CD, Domestic 120Vac Power Cord, European style Schuko Power Cord, Owner's Manual, UPS/Computer Cable and Battery connection jumper plug.
2.Verify that the UPS unit is to be used with the proper input voltage and the equipment to be connected to it’s output is designed to operate from a 120Vac source. If the UPS is to be connected to a 230Vac, 50Hz European source verify the connected equipment was designed to operate from a 120Vac, 50Hz power source. This information is stated on the nameplate label located on the model number label located on rear panel of the unit.
3.This UPS has been shipped with the battery connection jumper removed to meet new transportation regulations.
IMPORTANT
THE BATTERY CONNECTION JUMPER MUST BE INSTALLED PRIOR TO PLUGGING IN AND ATTEMPTING TO TURN ON THE UPS.
4.Select a suitable location for the UPS, near enough to the computer or equipment to allow connection of the equipment power plug to the receptacles located on the rear panel of the UPS.
5.If you are connecting the UPS to a PC Computer, you may want to install the supplied UPSilon shutdown and management software on your computer after connection the UPS interface cable to the
4