LCD Symbol Descriptions LCD Display | Falcon SUP700-1C, SUP1.0K-1C

LCD SYMBOL DESCRIPTIONS

LCD DISPLAY

1.Over Load --The connected load exceeds the UPS output rating. Remove some of the load from the UPS to correct this condition.

2.Load Level --Bar graph indicates the percent of UPS load capacity remaining.

3.UPS is loaded - This symbol is displayed when the UPS output load exceeds 30 watts and disappears when the load is under 25%.

4.Normal Mode - The sinewave symbol will be displayed when the UPS is operating normally from the utility line.

Battery Mode - The sinewave and battery symbols will blink when the UPS is operating on its internal battery.

Test Mode - The sinewave symbol will display steadily and the battery symbol will blink during a UPS self test.

5.Buck Mode - The Automatic Voltage Regulator (AVR) is reducing the UPS output voltage due to a high utility voltage condition. The sinewave symbol is also displayed to indicate that the UPS is operating normally from the utility line.