EverFocus ESM308T000D user manual Introduction

This handy switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables.

Easy-to-follow instructions in this user manual help make installation quick and simple, so you’ll also soon be enjoying the benefits of these additional features:

•10/100/1000 auto-sensing ports automatically detect optimal network speeds

•IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports

•Power output up to 30 Watts per port*

•Total power budget of 130 Watts

•Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)

•Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection

•All RJ45 ports with Auto-MDIX (auto uplink) support

•Web-based configuration

•Provides detailed traffic and power use statistics

•Supports SNMP management

•Supports VLAN (tag-based and port-based)

•Provides IEEE 802.1x port-based security

•Supports link aggregation (trunking)

•Supports port mirroring

•Supports two types of QoS: 802.1p and DSCP

•Broadcast storm control with multicast packet rate settings

•Store and forward switching architecture

•Supports jumbo frames up to 9.6 kBytes

•Supports Rapid Spanning Tree/Spanning Tree protocol

•IEEE 802.3x flow control for full duplex

•Supports up to 8192 MAC address entries

•176 kBytes buffer memory

•Desktop-size metal case

*Total PoE budget for this switch is 130 watts. Per-port average power distribution is 15 Watts; maximum per-port power usage cannot exceed 30 Watts.

Some of the following screen images have been modified to fit the format of this user manual.

NOTE: For a quick install procedure, refer to the quick install guide enclosed with this product.

2 INTRODUCTION