EverFocus ESM308T000D user manual PoE Configuration, Storm Control Configuration

Page 20

remotely control and centralized the power management simply by using a Cat5 cable to deliver both power and data.

PoE Configuration

PoE Enabled: When enabled (checked), you can use the port to supply power to the attached — and thus, powered — device (PD), which in turn allows you to remotely access that device and monitor its status.

PD Class: This indicates the PD’s classification (Class 0-4).

Delivering Power (W): This is the port’s output power.

Current (mA): This is the port current.

Voltage (V): This is the port voltage.

Power Budget (%): This is the percentage of power usage.

Storm Control

Broadcast storms can occur when a device on your network is malfunctioning or if application programs are not well designed or properly configured. If there is too much broadcast traffic on your network, performance can be severely degraded — even to the point where everything comes to a complete halt. You can protect your network from broadcast storms by setting a threshold for broadcast traffic for each port. Any broadcast packets exceeding the specified threshold will then be dropped.

Storm Control Configuration

There are three types of traffic that can be rate limited: Broadcast Rate, Multicast Rate and Flooded Unicast Rate. The Rate field (number of frames per second) is set by a single drop-down list since the same threshold is applied to every port on the switch. In other words — regardless of the flow-control settings — when the threshold is exceeded, packets are dropped.

20

WEB-BASED BROWSER MANAGEMENT

 

Image 20
Contents ESM308T000D Introduction Contents Safety & Compliance Statements Installation TipsConnections & Indicators LEDsWEB-BASED Browser Management SystemWEB-BASED Browser Management WEB-BASED Browser Management Ports VLANs Vlan Port SegmentationVlan Setup Vlan Per Port ConfigurationWEB-BASED Browser Management Aggregation / Trunking Configuration AggregationLacp Port Configuration Rstp System ConfigurationRstp Port Configuration Igmp SnoopingIgmp Configuration MirroringMirroring Configuration Quality of ServiceQoS Configuration QoS Mode 802.1pQoS Mode Dscp PoE Power over Ethernet Storm Control PoE ConfigurationStorm Control Configuration Statistics Overview Detailed StatisticsLacp Status Lacp Aggregation OverviewLacp Port Status Rstp StatusRstp Vlan Bridge Overview Rstp Port StatusIgmp Status VeriPHYMaintenance PingReboot Factory DefaultConfiguration File Transfer Software UploadSpecifications

ESM308T000D specifications

The EverFocus ESM308T000D is a cutting-edge surveillance camera designed to meet the demands of modern security applications. This device stands out for its robust features, advanced technologies, and exceptional performance, making it an ideal choice for various environments, including retail, transportation, and public spaces.

One of the key highlights of the ESM308T000D is its high-definition video resolution. Offering up to 3 Megapixels, this camera captures detailed images, ensuring that every critical detail is visible. This level of clarity is particularly beneficial for monitoring large areas or identifying faces and license plates.

The camera is equipped with a state-of-the-art image sensor that enhances low-light performance, allowing for effective surveillance even in challenging lighting conditions. With the support of Wide Dynamic Range (WDR) technology, the ESM308T000D maintains image quality in environments with contrasting light levels, minimizing overexposed highlights and underexposed shadows.

In terms of durability, the ESM308T000D is built to withstand harsh environmental conditions. It comes with an IP66-rated housing, which protects the camera from dust and water ingress, making it suitable for outdoor installations. Additionally, the camera’s robust construction ensures reliable performance in demanding weather conditions.

The ESM308T000D also incorporates advanced video compression technologies, such as H.265 and H.264, which optimize bandwidth and storage requirements without compromising image quality. This feature is crucial for users looking to maximize their resources while still maintaining a high standard of surveillance.

For added versatility, the camera supports various control protocols, allowing seamless integration with existing security systems. This includes compatibility with ONVIF standards, ensuring that it can be easily deployed within various network architectures.

Furthermore, the ESM308T000D includes features like motion detection and smart alerts, which enhance the surveillance experience by providing real-time notifications when unusual activity is detected. By utilizing these features, users can respond quickly to potential security incidents.

In conclusion, the EverFocus ESM308T000D combines high-definition imaging, advanced low-light capabilities, robust construction, and smart technology to deliver a comprehensive surveillance solution. Its versatility, reliability, and ease of integration make it a valuable asset for any security setup, providing peace of mind in an increasingly complex world.