EverFocus ESM308T000D user manual Safety & Compliance Statements, Installation Tips

Page 4

SAFETY & COMPLIANCE STATEMENTS

FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation.

CE STATEMENT

This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class A for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the member states relating to electromagnetic compatibility.

INSTALLATION TIPS

As with any electrical device, you should place the switch where it will not be subjected to extreme temperatures, humidity or electromagnetic interference:

•Place the switch on a level surface with at least 25 mm (approx. 1”) of clearance for ventilation;

•The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius).

•The relative humidity should be less than 90 percent, non-condensing.

•Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M) field stength.

•Make sure that the switch receives adequate ventilation. Do not block the fan exhaust port on the switch.

•The power outlet should be within 1.5 meters of the switch.

•Do not place objects on top of the unit.

•Always avoid dust and dirt.

4

REGULATORY STATEMENTS

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents ESM308T000D Introduction Contents Safety & Compliance Statements Installation TipsConnections & Indicators LEDsWEB-BASED Browser Management SystemWEB-BASED Browser Management WEB-BASED Browser Management Ports VLANs Vlan Port SegmentationVlan Setup Vlan Per Port ConfigurationWEB-BASED Browser Management Aggregation / Trunking Configuration AggregationLacp Port Configuration Rstp System ConfigurationRstp Port Configuration Igmp SnoopingIgmp Configuration MirroringMirroring Configuration Quality of ServiceQoS Configuration QoS Mode 802.1pQoS Mode Dscp PoE Power over Ethernet Storm Control Configuration PoE ConfigurationStorm Control Statistics Overview Detailed StatisticsLacp Status Lacp Aggregation OverviewLacp Port Status Rstp StatusRstp Vlan Bridge Overview Rstp Port StatusIgmp Status VeriPHYMaintenance PingReboot Factory DefaultConfiguration File Transfer Software UploadSpecifications

ESM308T000D specifications

The EverFocus ESM308T000D is a cutting-edge surveillance camera designed to meet the demands of modern security applications. This device stands out for its robust features, advanced technologies, and exceptional performance, making it an ideal choice for various environments, including retail, transportation, and public spaces.

One of the key highlights of the ESM308T000D is its high-definition video resolution. Offering up to 3 Megapixels, this camera captures detailed images, ensuring that every critical detail is visible. This level of clarity is particularly beneficial for monitoring large areas or identifying faces and license plates.

The camera is equipped with a state-of-the-art image sensor that enhances low-light performance, allowing for effective surveillance even in challenging lighting conditions. With the support of Wide Dynamic Range (WDR) technology, the ESM308T000D maintains image quality in environments with contrasting light levels, minimizing overexposed highlights and underexposed shadows.

In terms of durability, the ESM308T000D is built to withstand harsh environmental conditions. It comes with an IP66-rated housing, which protects the camera from dust and water ingress, making it suitable for outdoor installations. Additionally, the camera’s robust construction ensures reliable performance in demanding weather conditions.

The ESM308T000D also incorporates advanced video compression technologies, such as H.265 and H.264, which optimize bandwidth and storage requirements without compromising image quality. This feature is crucial for users looking to maximize their resources while still maintaining a high standard of surveillance.

For added versatility, the camera supports various control protocols, allowing seamless integration with existing security systems. This includes compatibility with ONVIF standards, ensuring that it can be easily deployed within various network architectures.

Furthermore, the ESM308T000D includes features like motion detection and smart alerts, which enhance the surveillance experience by providing real-time notifications when unusual activity is detected. By utilizing these features, users can respond quickly to potential security incidents.

In conclusion, the EverFocus ESM308T000D combines high-definition imaging, advanced low-light capabilities, robust construction, and smart technology to deliver a comprehensive surveillance solution. Its versatility, reliability, and ease of integration make it a valuable asset for any security setup, providing peace of mind in an increasingly complex world.
Top Page Image Contents