SNMP Write Community: Any 20 characters. Default: private. This parameter identifies the MIB tree(s) to which this entry authorizes write access.
SNMP Trap Community: Any 20 characters. Default: public. This parameter identifies the MIB tree(s) to which this entry authorizes access for notifications.
Ports
The settings on these screens — including Mode and Flow Control — allow you to configure the functions of each port, in part so you can limit the number of devices using a switch port and protect against MAC flooding attacks. Select the port number and set its functions, then click Apply to save the new settings to the device.
Enable Jumbo Frames: Select/enable to adjust the size of jumbo frames. This switch provides more efficient throughput for large sequential data transfers by supporting jumbo frames on Gigabit Ethernet ports up to 9600 bytes. Compared to standard Ethernet frames that run only up to 1500 bytes, using jumbo frames significantly reduces the
| 9 |
|