EverFocus ESM308T000D Reboot, Factory Default, Software Upload, Configuration File Transfer

Reboot

Click Yes to restart the switch. The reset is complete when the Power LED stops blinking.

Factory Default

This function is to force the switch back to the original factory settings. To reset the switch, select Reset to Factory Defaults from the drop-down list and click Apply. The LAN IP Address, Subnet Mask and Gateway IP Address will be reset to their factory settings.

Software Upload

Select Upgrade Firmware from the Tools drop-down list, click Browse to select the firmware file, then click Upload.

Configuration File Transfer

This allows you to save the switch’s current configuration or restore a previously saved configuration back to the device. Configuration files can be saved to any lo- cation on the Web management station. Click Browse to find a configuration file, then click Upload to save it or Download to restore it.

Logout

The administrator has write access for all parameters governing the onboard agent, so you should assign a new administrator password as soon as possible and store it in a safe place.