Euphonix SH612 manual Madi Port Definitions, Edit Route, Add Route, Store Routing Matrix

Euphonix SH612 Studio Hub User Guide Menu Reference and Technical Specifications

To create a route:

1.Press the MADI port button corresponding to the port to route to or from.

The Add Route submenu appears displaying the input and output ports and channels. You can also locate to the Add Route Menu through the menu system.

In: [1: 1 - 56] To Out: [1: 1- 56]

2.Use the arrow keys to move the cursor under the number to adjust and the SpinKnob to adjust the number.

3.Press Select to finalize the route.

NOTE: The SH612 does not provide visual confirmation of the active routes so you must check that the route was correct by looking at the meters on the R-1 or System 5 console.

MADI Port Definitions

This parameter can specify each MADI port for AudioDeck (R-1) or non-AudioDeck (System 5) connections. For the R-1 version 3, the MADI port definitions (AudioDeck vs. non-AudioDeck) are saved as part of a user routing preset and are not Global settings. If you change your port definitions, you need to update existing user presets with the new settings.

Edit Route

Modifies the mapping of MADI input ports to output ports.

Add Route

Press Select to display:

In: [1: 1 - 56] To Out: [1: 1- 56]

Use the arrow keys to move between the In/Out port numbers and the SpinKnob to set the port number.

NOTE: Edit Route, Add Route, Recall Routing Matrix, and Store Routing Matrix are available only for SH612s configured for the R-1. These options are not available for SH612s configured for System 5.

Store Routing Matrix

Stores up to 20 frequently used custom routes for instant recall.

40