Euphonix SH612 manual 4Jupiter Switcher Output dialog

Euphonix SH612 Studio Hub User Guide Integration With Jupiter VM3000 Routers

5.When finished entering all inputs, click Apply and Close.

6.Save the configuration set.

4.2.4Switcher Output

1.If you have multiple switchers, select Jupiter->Switcher Output in the Con- figurator.

This displays a dialog to choose which switcher to edit.

2.Click the switcher added in Switcher Description above to describe the SH612.

3.Press OK.

The Switcher Output dialog opens.

Figure 4-4Jupiter Switcher Output dialog

4.Enter each SH612 output device on a separate row. For each output, enter the physical outputs for each level corresponding to their outputs on the SH612.

Note again that outputs start at 000 so output 1 on MADI port 1 is output 000 on the Jupiter and output 1 on MADI port 2 is output 064 on the Jupiter. There are no matching outputs on the SH612 for Jupiter outputs 056–063.

NOTE: The Security, S-T, and Password settings do not affect the SH612 routing. Check with your Jupiter router system administrator to see if they affect your configuration.

5.When finished entering all outputs, click Apply and then Close.

6.Save the configuration set.

29