Euphonix SH612 manual Transport, Recall Setup, Control Port, Varispeed Display

Page 42

Euphonix SH612 Studio Hub User Guide

Menu Reference and Technical Specifications

 

 

 

 

Recall Setup

Recalls all parameters from one of 20 locations.

Control Port

This must be set correctly to control the SH612 from the R-1 recorder or System 5 con- sole. The SH612 can be controlled from System 5 from the RS-422 Control port (serial 9-pin connector) or from the R-1 from the IEEE-1394 port. The unit may appear to be disabled if the control port selected here does not match the connected port.

Varispeed Display

Shows the extent to which playback speed is altered.

Percent: -12.5% to + 12.5%

Semitones: -2.32 to + 2.40 semitones

5.1.7Transport

Used with the R-1, the Transport menu converts the SH612 front panel menu controls into Transport controls. This allows the SH612 to send Machine Control commands to other devices. This feature is not implemented for use with System 5.

The R-1 must be set to receive Machine Control commands from the SH612 and Ma- chine Control must be turned on. Two menus provide different controls.

The first menu has:

Stop: Menu marked by a square; controlled by the Info button

Forward Play: Menu marked by a single right arrow; controlled by the button with a single, right arrow

Reverse Play: Menu marked by a single left arrow; controlled by the button with a single, left arrow

The second menu has:

Stop: Menu marked by a square; controlled by the Info button

Forward Shuttle: Menu marked by a double, right arrow; controlled by the button with a single, right arrow

Reverse Shuttle: Menu marked by a double, left arrow; controlled by the but- ton with a single, left arrow

In the top of each menu the time and play/ stop /shuttle status is shown.

42

Image 42
Contents Euphonix SH612 Studio Hub User Guide Euphonix, IncMail info@euphonix.com Table of Contents Euphonix SH612 Studio Hub User Guide List of Figures Euphonix SH612 Studio Hub User Guide Features Introduction to the SH612Power On Sequence PAL/SECAM 25 fpsBlack and white video rate Standard Operation Setting the Control PortModes of Operation ES ControlEuphonix SH612 Studio Hub User Guide Getting Started Status Display Front PanelLCD Display Menu DisplayArrow Keys Menu ControlsInfo EscapeSpinKnob Sample Rate Controls/IndicatorsSelect SpinKnobSample Rate Key Sample Rate LEDsMadi Indicators 6MADI ButtonsRear Panel Connectors 7SH612 Rear PanelPage Page Configuration and Patches ConnectionsRoute Manager Euphonix SH612 Studio Hub User Guide Standalone Madi Routing 2Edit Current Configuration tab Under Studio Hub Input Connections, select Madi In #1Creating Custom Routes Under Studio Hub Output Connections, select Madi Out #3Select the Configurations and Patches tab Saving PatchesEuphonix SH612 Studio Hub User Guide Standalone Madi Routing Connections and Basic Setup Integration With Jupiter VM3000 RoutersJupiter Configuration Do not use ES-Bus, ES-Physical, or ES-SwitchSerial Protocol Switcher Description 2Jupiter Switcher Description dialogSwitcher Input 3Jupiter Switcher Input dialogSwitcher Output 4Jupiter Switcher Output dialogFinishing the Configuration 5 AES/Analog RoutingMenu Reference and Technical Specifications Menu ReferenceQuick Setup Menu Quick Setup MenuWord Clock In Oversample Sample Rate Setup MenuCustom Sample Rate Word Clock Out OversampleTime Code Setup Menu Select EscTime Code Mode Jam Sync ModeTime Code Offset Time Code Free Wheel Duration Drift Warning ThresholdLTC Output Gain Video Setup Menu SelectVitc Read Line # Bitc Window EnableVideo Jam Sync Vitc Write Line #Madi Setup Menu Madi Routing MenuAdd Route Madi Port DefinitionsEdit Route Store Routing MatrixStore Setup Utility MenuRecall Routing Matrix Control Port Recall SetupTransport Varispeed DisplaySH612 Technical Specifications SH612 Technical Specifications