Encore electronic ENMGS-24+4 Management guide, Access the management interface of the Switch

Page 12

Management guide

Access the management interface of the Switch

This section instructs you how to enter and proceed the advanced management capability, which can be accessed through console port or Telnet session / Internet Browser over the network (in-band).

Manage the device via command line interface

To start-up the command line interface, please connect a PC COM port to the RS-232 connector and activate a terminal emulation software (e.g. HyperTerminal of Windows.)

The terminal emulation software should be started as the following configuration:

1.Data rate: 115200 baud

2.Data format: 8 data bits, 1 stop bit and no parity

3.Flow control: none.

4.Click the property icon, select settings, make sure that:

5.“The Function, arrow, and ctrl keys act as”: Terminal keys

”Emulation”: VT100

Note: To manage via command line interface, please find the “Appendix” for more information

Manage the device via WEB browser

To access the Web-based management interface, you should configure the management station with an IP address and subnet mask that compatible to your switch.

The factory default value of the switch:

IP：	192.168.1.1
Subnet Mask：	255.255.255.0
Default Gateway：	192.168.1.254
	11

Image 12

Contents ENMGS-24+4 FCC Certifications CE Mark WarningTable of Contents Product Specifications Appendix Command Line Interface Unpacking Information IntroductionGeneral Description Key Features PowerFront Panel LEDs Definition1000M 10/100MPort Operation Restore Default Button Power ReceptacleRear Panel Installation Desktop InstallationRack-mount Installation Installing Network Cables Media Speed WiringFunctional Description Access the management interface of the Switch Manage the device via command line interfaceManagement guide Manage the device via WEB browserPage Homepage System Items FunctionsPort Functioning Vlan Page Pvid Aggregation/ Trunk Configuration Quality of Service Port-based mode QoSTag based QoS Dscp mode QoS Bit 0 Delay Bit 1 Throughput Bit 3 ReliabilityMirror Configuration Rate Limit Snmp Discovery Auto SearchManual Add DeleteStatistics Overview Detailed StatisticsFactory Default Smart BootRestore Factory Default RestartSoftware Upload Product Specifications TemperatureRate LED indications SystemAppendix- Command Line Interface Start-up and Terminal configurationLogin/Logout Procedures Command Hierarchy Entering CommandsCommand Description System CommandsConsole Commands Port Commands Port Configuration portlistPort Mode portlist mode Port Flow Control portlist enabledisablePort Admin portlist enabledisable Port MaxFrame portlist framesizeresetPort Statistics portlist clear Vlan Commands Vlan Configuration portlistVlan Add vidlist portlist Vlan Delete vidlistVlan OnlyTag portlist enabledisable Vlan Egress portlist untaggedtaggedVlan Pvid portlist vidnone Aggregation Commands Aggr ConfigurationAggr Mode smacdmacxor Aggr Delete portlistQoS Commands QoS Configuration portlistQoS Mode portlist tagportdiffserv QoS Port portlist classMirror Commands Mirror Source portlist enabledisableQoS DiffServ dscpno class Mirror Port portIP Commands Snmp CommandsRatelimit Commands Snmp Setup enabledisableRatelimit Configuration Ratelimit Setup traffic type optionRatelimit Egress portlist enabledisable rate Ratelimit Ingressportlist enabledisable rate