Encore electronic ENMGS-24+4 manual Appendix- Command Line Interface, Login/Logout Procedures

Page 33

Appendix- Command Line Interface

Start-up and Terminal configuration

To start-up the command line interface, please connect a PC COM port to the RS-232 connector and activate a terminal emulation software (e.g. HyperTerminal of Windows.)

The terminal emulation software should be started as the following configuration:

6.Data rate: 115200 baud

7.Data format: 8 data bits, 1 stop bit and no parity

8.Flow control: none.

9.Click the property icon, select settings, make sure that:

10.“The Function, arrow, and ctrl keys act as”: Terminal keys

”Emulation”: VT100

Login/Logout Procedures

To get access to the CLI, you will have to get the username and password for login. The default username and password are admin/admin.

Note: We recommend users to configure a new username/password to prevent unauthorized users from accessing to the device.

32

Image 33

Contents ENMGS-24+4 CE Mark Warning FCC CertificationsTable of Contents Product Specifications Appendix Command Line Interface Unpacking Information IntroductionGeneral Description Power Key FeaturesFront Panel LEDs Definition1000M 10/100MPort Operation Restore Default Button Power ReceptacleRear Panel Installation Desktop InstallationRack-mount Installation Media Speed Wiring Installing Network CablesFunctional Description Manage the device via command line interface Access the management interface of the SwitchManagement guide Manage the device via WEB browserPage Homepage Items Functions SystemPort Functioning Vlan Page Pvid Aggregation/ Trunk Configuration Port-based mode QoS Quality of ServiceTag based QoS Bit 0 Delay Bit 1 Throughput Bit 3 Reliability Dscp mode QoSMirror Configuration Rate Limit Snmp Auto Search DiscoveryManual Add DeleteDetailed Statistics Statistics Overview Smart Boot Factory Default Restore Factory Default RestartSoftware Upload Temperature Product SpecificationsRate LED indications SystemAppendix- Command Line Interface Start-up and Terminal configurationLogin/Logout Procedures Entering Commands Command HierarchySystem Commands Command DescriptionConsole Commands Port Configuration portlist Port CommandsPort Mode portlist mode Port Flow Control portlist enabledisablePort Admin portlist enabledisable Port MaxFrame portlist framesizeresetPort Statistics portlist clear Vlan Configuration portlist Vlan CommandsVlan Add vidlist portlist Vlan Delete vidlistVlan OnlyTag portlist enabledisable Vlan Egress portlist untaggedtaggedVlan Pvid portlist vidnone Aggr Configuration Aggregation CommandsAggr Mode smacdmacxor Aggr Delete portlistQoS Configuration portlist QoS CommandsQoS Mode portlist tagportdiffserv QoS Port portlist classMirror Source portlist enabledisable Mirror CommandsQoS DiffServ dscpno class Mirror Port portSnmp Commands IP CommandsSnmp Setup enabledisable Ratelimit CommandsRatelimit Configuration Ratelimit Setup traffic type optionRatelimit Ingressportlist enabledisable rate Ratelimit Egress portlist enabledisable rate