Beacon Interval: Beacons are packets sent by a wireless Access Point to synchronize wireless devices. Specify a Beacon Period value between 20 and 1024. The default value is set to 100 milliseconds.
Data Rate: Select a transmission rate from the
Preamble Type: Select a long or short preamble type. For best performance, it is recommended that the preamble type of the AP matches that of the client.
Broadcast SSID: Select Enable or Disable. This is the SSID broadcast feature. If you set this value to Visible, then the clients will be able to find this SSID on a site survey.
802.11g protection: If your network includes 11g and 11b clients, it’s recommended to enable the feature as this will enhance the throughput rate in a mixed mode.
User Isolation: Select Enable or Disable. This is a security feature that will isolate every client device that is associated with the device. One client device will not be able to view the other client device in a network neighborhood. If used in a public area such as a coffee shop, it is recommended to enable this feature in order to protect the privacy of the client devices.
RF Output Power: You may control the output power of the device by selecting a value. This feature can be helpful in restricting the coverage area of the wireless network.
QoS WMM: If you are using VoIP, it is recommended to enable WMM.
Click on the Apply Changesto save the changes.
30