EnGenius Technologies 1.2 user manual Wireless Advanced Settings

Page 29

￿Show Active Clients: Click on this button to view a list of clients that are associated with this device.

￿Click on the Apply Changesto save the changes.

Wireless Advanced Settings

￿Click on the Advanced Settings link on the navigation drop-down menu. These options allow you to configure the authentication type, fragment threshold, RTS threshold, beacon interval, and RF output power.

￿Authentication Type: Select Open System, Shared Key or Auto as an authentication type. An open system allows any client to authenticate as long as it conforms to any MAC address filter policies that may have been set. All authentication packets are transmitted without encryption. Shared Key sends an unencrypted challenge text string to any device attempting to communicate with the AP. The device requesting authentication encrypts the challenge text and sends it back to the access point. If the challenge text is encrypted correctly, the access point allows the requesting device to authenticate. It is recommended to select Auto if you are not sure which authentication type is used.

￿Fragment Threshold: Packets over the specified size will be fragmented in order to improve performance on noisy networks. Specify a value between 256 and 65535. The default value is 2346.

￿RTS Threshold: Packets over the specified size will use the RTS/CTS mechanism to maintain performance in noisy networks and preventing hidden nodes from degrading the performance. Specify a value between 1 and 2347. The default value is 2347.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents 11b/g Wireless Soho Router Table of Contents Page Revision History Introduction Features & BenefitsWireless Soho Router Description Package ContentsApplications System RequirementsAd-hoc peer-to-peer Mode Network ConfigurationIP Address Configuration Hardware InstallationLogging Web ConfigurationManagement Status Dynamic DNS StatisticsTime Zone Setting Denial of Service DoS Log Save Configuration to a File Upgrade FirmwareRestore Settings to Factory Defaults Restore the Configuration from a FileTCP/ IP Settings Administrator SettingsLAN Settings Static IP LAN Settings Dhcp Client LAN Settings Dhcp Server WAN Settings Static IP WAN Settings Dhcp Client WAN Settings PPPoE WAN Settings Pptp Click on the Apply Changesto save the changes Wireless Basic Settings WirelessWireless Advanced Settings Page Wireless Security WEP Wireless SecurityWireless Security Disabled Page Wireless Security WPA / WPA2-Mixed Wireless Access Control WDS Wireless Distribution System WDS Security WEP 64/128 WDS SecurityWDS Security None WDS Security WPA TKIP, WPA2 AES Page Port Filtering FirewallIP Filtering MAC Filtering Port Forwarding URL Filtering DMZ Appendix a Specifications Appendix B FCC Interference Statement Industry Canada statement
Top Page Image Contents