EnGenius Technologies 1.2 user manual Click on the Apply Changesto save the changes

Page 27

￿WAN Access Type: Select PPTP from the drop-down list. This type of connection is used when your ISP has provided you a dedicated IP address.

￿IP Address: Enter an IP address for this device, which is assigned by your ISP.

￿Subnet Mask: Enter the subnet mask for this IP address, which is assigned by your ISP.

￿Default Gateway: Enter the IP address of the default gateway, which is assigned by your ISP.

￿MTU: You may adjust the Maximum Transmit Unit (MTU), however it is recommend

that this value is set to the default: 1500 bytes

￿DNS 1-3:Specify the IP address of the DNS server

￿Clone MAC Address: Specify a MAC address if you would like to use a different MAC address on this device. (optional)

￿Enable uPNP: Place a check in this box to enable UPnP. It is recommended to enable this feature as it’s used by several applications.

￿Enable PING Access on WAN: Place a check in this box if you would like the device to be pinged from the WAN side (ISP).

￿Enable Web Sever Access on WAN: Place a check in this box if the static IP address if used for a web-server.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of IPsec packets on a VPN connection.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of PPTP packets on a VPN connection.

￿Enable IPsec pass through on VPN connection: Place a check in this box to enable the pass through of L2TP packets on a VPN connection.

￿Click on the Apply Changesto save the changes.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 11b/g Wireless Soho Router Table of Contents Page Revision History Introduction Features & BenefitsWireless Soho Router Description Package ContentsApplications System RequirementsAd-hoc peer-to-peer Mode Network ConfigurationIP Address Configuration Hardware InstallationLogging Web ConfigurationManagement Status Dynamic DNS StatisticsTime Zone Setting Denial of Service DoS Log Save Configuration to a File Upgrade FirmwareRestore Settings to Factory Defaults Restore the Configuration from a FileTCP/ IP Settings Administrator SettingsLAN Settings Static IP LAN Settings Dhcp Client LAN Settings Dhcp Server WAN Settings Static IP WAN Settings Dhcp Client WAN Settings PPPoE WAN Settings Pptp Click on the Apply Changesto save the changes Wireless Basic Settings WirelessWireless Advanced Settings Page Wireless Security Wireless Security DisabledWireless Security WEP Page Wireless Security WPA / WPA2-Mixed Wireless Access Control WDS Wireless Distribution System WDS Security WDS Security NoneWDS Security WEP 64/128 WDS Security WPA TKIP, WPA2 AES Page Port Filtering FirewallIP Filtering MAC Filtering Port Forwarding URL Filtering DMZ Appendix a Specifications Appendix B FCC Interference Statement Industry Canada statement
Top Page Image Contents