deXlan user manual Connect the monitor to the IP-KVM switch console side

Page 12

Single port KVM over IP switch

Step 2

Connect the monitor to the IP-KVM switch console side.

Step 3

Connect the keyboard to the IP-KVM switch console side.

Step 4

Connect the mouse to the IP-KVM switch console side.

Step 5

Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the host of the IP-KVM switch.

Step 6

Connect one end to the PS/2 mouse port on the computer, and the other end to the host PS/2 mouse port on the IP-KVM switch.

Step 7

Connect one end to PS/2 keyboard port on the computer, and the other end to the host PS/2 keyboard port on the IP-KVM switch.

Image 12

Contents USER’S Manual RevTable of Contents Troubleshooting Certificates Installation IP-KVM switch hardware installationInitial IP configuration Video modesWeb interface Remote ConsoleTop part of the Remote Console When the server is up and running When the server is deadFeatures Package contentsTechnical specifications Model No Single port IP-KVM SwitchSystem requirement Model No Cable diagrams PS/2 Cable VGA CableUSB 2.0 Cable AT to PS/2 keyboard adapter OptionalConnecting IP-KVM switch to the host system Operation OverviewStep Connect the monitor to the IP-KVM switch console side Connecting Ethernet OptionSingle port KVM over IP switch Initial Configuration Initial configuration via Dhcp serverIP-KVM switch Setup Tool Authentication Initial configuration via serial consoleIP autoconfiguration Keyboard, Mouse and Video configurationIP-KVM switch keyboard settings IP addressRemote Mouse Settings Host system mouse settingsAuto mouse speed and mouse synchronization Fast SyncWindows XP Mouse Settings Single and Double Mouse ModeActive Desktop Prerequisites TelnetLogin into the IP-KVM switch and logout Internet Explorer displaying the encryption key lengthNavigation MainLogout from the IP-KVM switch Remote Console General descriptionMain Window Remote ConsoleRemote Console Control Bar Remote Console Control BarExclusive Access Monitor OnlyScaling Mouse HandlingLocal Cursor Video Settings Remote Console Options MenuCursorBrightness ContrastClock Soft Keyboard 12. Soft Keyboard13. Soft Keyboard Mapping Remote Console Status Line 15. Status lineRemote mass storage control 5.5.1 Driver Installation 17. KVM Vision Viewer Setup stepCreate a New Device 17. Create a new DeviceDrive Redirection Settings 18. New Device20. Drive Redirection dialog Remote Control KVM Console Menu OptionsTelnet Console Single port KVM over IP switch Virtual Media Floppy Disk CD ROM Select Windows Share Select Sharing to open the configuration dialog Creating an Image Floppy Images CD ROM/ISO Images Change Password User ManagementUsers And Groups 13. Set UserKVM Settings User Console15. User Console Settings Part Single port KVM over IP switch Power Control 16. Power Control17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings VideoDevice Settings NetworkSingle port KVM over IP switch Dynamic DNS 20. Dynamic DNSSingle port KVM over IP switch Security 22. Device SecuritySingle port KVM over IP switch Anti Brute Force Setting Unblocking usersCertificate 24. SSL Certificate Upload Single port KVM over IP switch Serial Port 25. Serial PortSingle port KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event LogSingle port KVM over IP switch Reset Functions Device InformationBoard Summary Update Firmware 32. Event Log ListSingle port KVM over IP switch Unit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS2 KVM over IP Key Codes Table B.1 Key Names Video Modes