deXlan IP-KVM user manual Web interface, Remote Console

Page 5

Login name

Password

Single port KVM over IP switch

Parameter	Value
IP auto configuration	DHCP
IP-Address	192.168.1.22
Net-mask	255.255.255.0
Default-Gateway	none

Table 1-1: Initial configuration

If this initial configuration doesn’t meet your local requirements, you need to do the initial IP configuration. Use one of the following ways:

1.Connect the enclosed NULL modem cable to the serial interface on the rear side. The serial interface needs to be adjusted with the parameters shown in table 1-2:

Parameter	Value
Bits/second	115200
Data bits	8
Parity	No
Stop bits	1
Flow Control	None

Table 1-2: Serial parameters

Use a terminal software (e.g. hyper term or minicom) to connect to IP-KVM switch. Reset IP-KVM switch and immediately press < ESC >. You will see some device information and a ’=>’ prompt. Enter the command ’config’ and press < Enter >. After waiting a few moments you may configure IP auto configuration, IP address, net mask and default gateway. Pressing < Enter > without entering values does not change settings. The gateway value must be set to 0.0.0.0 (for no gateway) or any other value. You will be asked if the values are correct and get a chance to correct them. After confirming, IP-KVM switch performs a reset.

2.Use a crossover Ethernet cable to connect IP-KVM switch to a subnet where a DHCP server is available. After the DHCP server has assigned an IP address to IP-KVM switch you can use the web interface to configure the device.

Web interface

IP-KVM switch may be accessed using a standard web browser. You may use the HTTP protocol or a secure encrypted connection via HTTPS. Just enter the configured IP address of IP-KVM switch into your web browser. Initially there is only one user configured who has unrestricted access to all IP-KVM switch features:

super (factory default)

pass (factory default)

Please login and change the password immediately according to your own policies.

The Remote Console

The Remote Console is the redirected screen, keyboard and mouse of the remote host system to which IP-KVM switch is attached. The web browser which is used for accessing IP-KVM switch has to supply a Java Runtime Environment version 1.1 or higher. The Remote Console will behave exactly the same way as if you were sitting directly in front of the screen of your remote system. That means

Image 5

Contents Rev USER’S ManualTable of Contents Troubleshooting Certificates IP-KVM switch hardware installation InstallationInitial IP configuration Video modesRemote Console Web interfaceTop part of the Remote Console When the server is dead When the server is up and runningPackage contents FeaturesSystem requirement Model No Technical specifications Model NoSingle port IP-KVM Switch VGA Cable Cable diagrams PS/2 CableUSB 2.0 Cable AT to PS/2 keyboard adapter OptionalStep Connecting IP-KVM switch to the host systemOperation Overview Connect the monitor to the IP-KVM switch console side Option Connecting EthernetSingle port KVM over IP switch IP-KVM switch Setup Tool Initial ConfigurationInitial configuration via Dhcp server Initial configuration via serial console AuthenticationKeyboard, Mouse and Video configuration IP autoconfigurationIP-KVM switch keyboard settings IP addressHost system mouse settings Remote Mouse SettingsAuto mouse speed and mouse synchronization Fast SyncActive Desktop Windows XP Mouse SettingsSingle and Double Mouse Mode Telnet PrerequisitesInternet Explorer displaying the encryption key length Login into the IP-KVM switch and logoutMain NavigationRemote Console General description Logout from the IP-KVM switchRemote Console Main WindowRemote Console Control Bar Remote Console Control BarMonitor Only Exclusive AccessLocal Cursor ScalingMouse Handling Remote Console Options MenuCursor Video SettingsClock BrightnessContrast 12. Soft Keyboard Soft Keyboard13. Soft Keyboard Mapping 15. Status line Remote Console Status Line17. KVM Vision Viewer Setup step Remote mass storage control 5.5.1 Driver Installation17. Create a new Device Create a New Device18. New Device Drive Redirection Settings20. Drive Redirection dialog Menu Options Remote Control KVM ConsoleTelnet Console Single port KVM over IP switch Virtual Media Floppy Disk CD ROM Select Windows Share Select Sharing to open the configuration dialog Creating an Image Floppy Images CD ROM/ISO Images User Management Change Password13. Set User Users And GroupsUser Console KVM Settings15. User Console Settings Part Single port KVM over IP switch 16. Power Control Power ControlKeyboard/Mouse 17. Keyboard and Mouse SettingsVideo 18. Video SettingsNetwork Device SettingsSingle port KVM over IP switch 20. Dynamic DNS Dynamic DNSSingle port KVM over IP switch 22. Device Security SecuritySingle port KVM over IP switch Certificate Anti Brute Force SettingUnblocking users 24. SSL Certificate Upload Single port KVM over IP switch 25. Serial Port Serial PortSingle port KVM over IP switch 27. Date and Time Date And Time29. Event Log Event LogSingle port KVM over IP switch Board Summary Reset FunctionsDevice Information 32. Event Log List Update FirmwareSingle port KVM over IP switch 34. Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Single port PS2 KVM over IP Key Codes Table B.1 Key Names Video Modes