deXlan IP-KVM user manual Single port KVM over IP switch

Page 64

Single port KVM over IP switch

Serial line speed

The speed the IP-KVM switch is communicating with the modem. Most of all modems available today will support the default value of 115200 bps. In case you are using an old modem and discovering problems try to lower this speed.

Modem Init String

The initialization string used by the IP-KVM switch to initialize the modem. The default value will work with all modern standard modems directly connected to a telephone line. In case you have a special modem or the modem is connected to a local telephone switch that requires a special dial sequence in order to establish a connection to the public telephone network, you can change this setting by giving a new string. Refer to the modem's manual about the AT command syntax.

Modem server IP address

This IP address will be assigned to the IP-KVM switch itself during the PPP handshake. Since it is a point-to-point IP connection virtually every IP address is possible but you must make sure, it is not interfering with the IP settings of the IP-KVM switch and your console computer. The default value will work in most cases.

Modem client IP address

This IP address will be assigned to your console computer during the PPP handshake. Since it is a point-to-point IP connection virtually every IP address is possible but you must make sure, it is not interfering with the IP settings of the IP-KVM switch and your console computer. The default value will work in most cases.

IPMB over serial

To enable IPMB over serial, enable this option.

Passthrough access to serial port via Telnet

Using this option, it is possible to connect an arbitrary device to the serial port and access it (assuming it provides terminal support) via Telnet. Select the appropriate options for the serial port and use the Telnet Console, or a standard Telnet client to connect to the IP-KVM switch .

IPM 220-L (Inline Power Module)

This is an optionally available external module to switch power of a single system by putting it in the power supply line of the controlled system.

Image 64

Contents USER’S Manual RevTable of Contents Troubleshooting Certificates Installation IP-KVM switch hardware installationInitial IP configuration Video modesWeb interface Remote ConsoleTop part of the Remote Console When the server is up and running When the server is deadFeatures Package contentsSingle port IP-KVM Switch Technical specifications Model NoSystem requirement Model No Cable diagrams PS/2 Cable VGA CableUSB 2.0 Cable AT to PS/2 keyboard adapter OptionalOperation Overview Connecting IP-KVM switch to the host systemStep Connect the monitor to the IP-KVM switch console side Connecting Ethernet OptionSingle port KVM over IP switch Initial configuration via Dhcp server Initial ConfigurationIP-KVM switch Setup Tool Authentication Initial configuration via serial consoleIP autoconfiguration Keyboard, Mouse and Video configurationIP-KVM switch keyboard settings IP addressRemote Mouse Settings Host system mouse settingsAuto mouse speed and mouse synchronization Fast SyncSingle and Double Mouse Mode Windows XP Mouse SettingsActive Desktop Prerequisites TelnetLogin into the IP-KVM switch and logout Internet Explorer displaying the encryption key lengthNavigation MainLogout from the IP-KVM switch Remote Console General descriptionMain Window Remote ConsoleRemote Console Control Bar Remote Console Control BarExclusive Access Monitor OnlyMouse Handling ScalingLocal Cursor Video Settings Remote Console Options MenuCursorContrast BrightnessClock Soft Keyboard 12. Soft Keyboard13. Soft Keyboard Mapping Remote Console Status Line 15. Status lineRemote mass storage control 5.5.1 Driver Installation 17. KVM Vision Viewer Setup stepCreate a New Device 17. Create a new DeviceDrive Redirection Settings 18. New Device20. Drive Redirection dialog Remote Control KVM Console Menu OptionsTelnet Console Single port KVM over IP switch Virtual Media Floppy Disk CD ROM Select Windows Share Select Sharing to open the configuration dialog Creating an Image Floppy Images CD ROM/ISO Images Change Password User ManagementUsers And Groups 13. Set UserKVM Settings User Console15. User Console Settings Part Single port KVM over IP switch Power Control 16. Power Control17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings VideoDevice Settings NetworkSingle port KVM over IP switch Dynamic DNS 20. Dynamic DNSSingle port KVM over IP switch Security 22. Device SecuritySingle port KVM over IP switch Unblocking users Anti Brute Force SettingCertificate 24. SSL Certificate Upload Single port KVM over IP switch Serial Port 25. Serial PortSingle port KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event LogSingle port KVM over IP switch Device Information Reset FunctionsBoard Summary Update Firmware 32. Event Log ListSingle port KVM over IP switch Unit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS2 KVM over IP Key Codes Table B.1 Key Names Video Modes