deXlan IP-KVM user manual Create a New Device, Create a new Device

Single port KVM over IP switch

5.5.2Create a New Device

5.5.2.1Start KVM Vision Viewer

5.5.2.2Click on “Device” and select “New Device” to create a new device

Figure 5-17. Create a new Device

Figure 5-17. Device Configuration dialog

Device Name: Enter a name to your device.

Network Address: Enter an IP address the IP-KVM switch uses.

Authentication Port: This is a fixed number “443”.

Username: The factory default Username is “super”

Password: The factory default Password is “pass”.

Connection Mode: With this option, you can specify whether the connection mode is “LAN”, “DSL”, “UMTS”, “ISDN 128k’ or “ISDN/Modem V9.0”.