deXlan 068420 user manual Email Settings

Page 14

IP POWER 9258 USER MANUAL

3. EMAIL SETTINGS:

When you finished the e-mail settings, you can set to let IP Power 9258 send its IP address automatically.

For example:

*Mail Server: abc.com

*Pop3Servcer : cdef.com

*Password : XXXXXXXX

*Sender: 123@abcd.com

*Receiver 1: 456@abcd.com

*Receiver 2: 789@efgh.com

*Receiver 3:

*Subject: 9258 IP address

*MailBody : Hello

1.) Mail Server : the server sends e-mail out.

Please make sure the server is an available mail server.

2.) Pop3Server : the server receive IP address ( in Internet WAN ) from your ISP for sending Internet IP address by E-mail when 9258 in Internet.

To receive IP address in WAN , please fill your ISP e-mail receive server. In this part, please also set the DNS of your ISP in system configuration.

3.) Password : the password of this mailbox is no longer than 8 English letters.

4.) Sender : please fill in the name of sender. The Mail Server must support SMTP and these fields must be filled in correctly.

5.) Receiver :no longer than 50 English letters. Please use blank space to separate two receiver’s e-mail address. After you have finished this setting, you will receive the email to inform you the IP address of the IP Power 9258 every time you enter the webpage.

6)Subject : the subject of the mail to be no more than 50 English letters.

7)Mail Body : please type the content of the mail here, it cannot be left empty.

After you have finished all of the above settings, click “ SAVE “ button to save your settings.

- 13 -

VER. X.X,

Image 14
Contents IP Power IP Power Important Notice Table of Content Specification IntroductionMinimum System Requirements SpecificationPackage contents Interface Description Software installation Hardware & Software installationHardware installation For 100-120V, please use power wire can support 15A currentInitial Settings Initial setting through the EthernetUsername admin Password Control and settings through the Internet Explore Control the power supply of outletsSetting the password for IP Power Power Supply State QuerySystem Settings Setting the IP address for IP PowerPage Email Settings Internal Clock Settings & Network Time Protocol NTP Control the IP Power 9258 through Time ScheduleSetup up own outlet default status Wake on Lan WOL Page Gprs for Cell Phone Support WAP Check 9258 status though Snmp Control and Settings Through Http Order FunctionYY=****+MM=**+DD=**+HH=**+MN=**+SS=* time parameter PARAM=* time schedule parameter . Parameter list as followEach file do not over the original file size FAQWebpage Customization Page VER Page VER