deXlan 068420 user manual Interface Description

Page 7

IP POWER 9258 USER MANUAL

3. Interface Description

IP Power 9258

Front interface shown below:

From left to the right

1.RESET: self-protect AC reset button. IP Power 9258 can cut off the power supply of outlets automatically if there is a shortcut or current overload. After user having solved the problem, push the reset button, the AC power supply will become normal.

2.LED: 4 LED indicator lights. If the LED is on, means the corresponding outlet is power on.

3.RS232 port: provide the power output state and get IP address to re-update if update fail

4.RJ45 Ethernet port: link to the net wire.

Rear interface shown below:

Port description (from left to the right)

1.90-240VAC power input port

2.Power switch : the power switch ON /OFF of IP Power 9258.

3.OUT 1- 4 : 4 individually switched AC outlets

- 6 -

Image 7

Contents IP Power IP Power Important Notice Table of Content Introduction SpecificationPackage contents SpecificationMinimum System Requirements Interface Description For 100-120V, please use power wire can support 15A current Hardware & Software installationHardware installation Software installationInitial setting through the Ethernet Initial SettingsUsername admin Password Control the power supply of outlets Control and settings through the Internet ExploreSetting the IP address for IP Power Power Supply State QuerySystem Settings Setting the password for IP PowerPage Email Settings Setup up own outlet default status Control the IP Power 9258 through Time ScheduleInternal Clock Settings & Network Time Protocol NTP Wake on Lan WOL Page Gprs for Cell Phone Support WAP Check 9258 status though Snmp Function Control and Settings Through Http OrderPARAM=* time schedule parameter . Parameter list as follow YY=****+MM=**+DD=**+HH=**+MN=**+SS=* time parameterWebpage Customization FAQEach file do not over the original file size Page VER Page VER