deXlan 068420 user manual Specification, Package contents, Minimum System Requirements

Page 6

IP POWER 9258 USER MANUAL

2.Specification

Package contents

One set of 9258:

*9258T -For EU / AU / UK

*9258S – For USA / TW / JP Option;

RJ45 (Cat5) net wire

Option : Power Cable

Minimum System Requirements

Intel Pentium III 300MHz or above/compatible AMD CPU

WINDOWS operating system (IE5.0+SPI) & LINUX Minimum 64MB RAM

VGA Card: supported direct draw

Network card with RJ45 port & Ethernet HUB or Switcher

Internet network (Ethernet, ADSL or other ways, depends on whether you need far end control ability or not)

NOTICES:

1.IP Power 9258S : for 220-250V, please use power (IN) wire at 10A current.. Max output current: (total) 10A. Max (individual) 6A.

2.IP Power 9258T : for 100-120V, please use power (IN) wire at 15A current.. Max output current: (total) 15A. Max (individual) 6A .

- 5 -

VER. X.X,

Image 6

Contents IP Power IP Power Important Notice Table of Content Specification IntroductionSpecification Package contentsMinimum System Requirements Interface Description Software installation Hardware & Software installationHardware installation For 100-120V, please use power wire can support 15A currentInitial Settings Initial setting through the EthernetUsername admin Password Control and settings through the Internet Explore Control the power supply of outletsSetting the password for IP Power Power Supply State QuerySystem Settings Setting the IP address for IP PowerPage Email Settings Control the IP Power 9258 through Time Schedule Setup up own outlet default statusInternal Clock Settings & Network Time Protocol NTP Wake on Lan WOL Page Gprs for Cell Phone Support WAP Check 9258 status though Snmp Control and Settings Through Http Order FunctionYY=****+MM=**+DD=**+HH=**+MN=**+SS=* time parameter PARAM=* time schedule parameter . Parameter list as followFAQ Webpage CustomizationEach file do not over the original file size Page VER Page VER