deXlan 068420 user manual Gprs for Cell Phone Support WAP

Page 18

IP POWER 9258 USER MANUAL

8. GPRS for Cell Phone : Support WAP.

IP POWER 9258 support GPRS function, you can use cell phone (with online function), We support : Motorola V878 , Sony Ericsson T630 & K700i. .

To setup the online device ( real IP address) as operate in browser .:

1)Address setting : key in your online IP address. For example : http://65.59.37.123 the interface is same as in IE(Internet Explore) .

2)The IP Address must be real IP address and can be work on Internet..

3)The name of IP device must be English , or will be encode in wap.

Before using WAP control, please check if your cell phone support GPRS and if your number had apply online service.

9.Firmware update:

If no firmware to update please do not go to this page.

As received new firmware, user can gain more functions for IP Power 9258 through firmware update. Click the firmware update on the right side of the page; the following window will pop up.

Step1 : Click firmware update“,you will see follow webpage :

Note: Do not click “ update “ if no firmware file update .

Step2 : Click update button, the following window will pop up.

Step3: Click the Brower button to find the corresponding update file (you can download it from our web site or ask it from the dealer), then click Update button to start update firmware. When the update is finished, you must wait one minute before you restart the IP Power 9258.

NOTICE:

*Before running the online update program, please make sure that the TCP port is set to 80,or the online update may fail.

*Please check with your reseller /distributor / importer for the update news.

*Id update fail mplease refer chapter 10 “ Webpage Customization “

- 17 -

VER. X.X,

Image 18
Contents IP Power IP Power Important Notice Table of Content Specification IntroductionSpecification Package contentsMinimum System Requirements Interface Description Software installation Hardware & Software installationHardware installation For 100-120V, please use power wire can support 15A currentInitial Settings Initial setting through the EthernetUsername admin Password Control and settings through the Internet Explore Control the power supply of outletsSetting the password for IP Power Power Supply State QuerySystem Settings Setting the IP address for IP PowerPage Email Settings Control the IP Power 9258 through Time Schedule Setup up own outlet default statusInternal Clock Settings & Network Time Protocol NTP Wake on Lan WOL Page Gprs for Cell Phone Support WAP Check 9258 status though Snmp Control and Settings Through Http Order FunctionYY=****+MM=**+DD=**+HH=**+MN=**+SS=* time parameter PARAM=* time schedule parameter . Parameter list as followFAQ Webpage CustomizationEach file do not over the original file size Page VER Page VER