Draytek manual Vigor2100VG

1.3.2 Vigor2100VG

LED	Status		Explanation
WLAN	on		The Wireless LAN function is active.
	blinking	Data packets are transmitted over Wireless LAN.
E-mail	blinking		When detecting one or more user-defined e-mails existing on
			mail server.
	orange		A normal 10Mbps connection is through its corresponding port.
WAN	green		A normal 100Mbps connection is through its corresponding
			port.
	blinking		Ethernet packets are transmitting.
			Solid light when the handset of phone is picked up (off
	green		hooked).
VoIP			Blinking per 2 seconds when phone is connected through
			VoIP.
	orange		Solid light when phone call is via PSTN life line.
ACT (Activity)	on		The router is powered on and running properly.
	orange		A normal 10Mbps connection is through its corresponding port.
LAN	green		A normal 100Mbps connection is through its corresponding
			port.
(P1, P2, P3, P4)
	blinking		Ethernet packets are transmitting.

Interface			Description
PWR			Connect the included power adapter to the power outlet.
Line			Connect to the analog phone line for PSTN life line.
Phone			Connect to the analog phone for VoIP communication.
WAN			Connect the Cable/ADSL modem to access the Internet.
			Restore the default settings. Usage: Turn on the router (ACT LED is
Factory Reset			blinking), press the hole and keep for more than 5 seconds. When the ACT
			LED begins to blink rapidly, release the button. Then the router will restart
			with the factory default configuration.
P1, P2, P3, P4		Connect to the local network devices.
	6