Draytek Vigor2100 manual For Pptp Users, Back to Factory Default Setting

Page 36

C. For PPTP Users

1.Check that whether the Enable option is selected.

2.Check that whether PPTP Server, Username, Password is entered the correct value given by your ISP.

3.Check that whether LAN2/WAN IP Network Settings is set appropriately or not. You need to enter “Specify an IP address”, IP Address and Subnet Mask with the correct value.

If the router settings are correct at all, and the router still does not connect, please contact your ISP technical support representative to help you for configuration.

Step 5. Back to Factory Default Setting

Warming: After pressing the "factory default setting", you will loose all settings you did before. Make sure you have recorded all useful settings. The password of factory default is null.

A Software Reset

You can also reset router to factory default via Web configurator.

B Hardware Reset

While the router is running (ACT LED blinking), press the button and hold for more than 5 seconds. The ACT LED begins to blink

30

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Page Safety Instructions and Approval SafetyWarranty Copyright InformationTools Updates Be aRegistered Owner FirmwareEuropean Community Declarations Regulatory Information Table of Contents Introduction Brief Overview Specifications Front Panel LEDs and Rear Panel Interfaces Vigor2100VVigor2100G WlanVigor2100VG Package Contains Quick Install Your Vigor2100 Series Router Hardware InstallationConfigure Your Router via Quick Start Wizard Introduction Configure Your Router via Quick Start WizardPPPoE Pptp Static IP Review the summary of settings Wireless LAN Settingsfor G models General SettingsSecurity WPA WEPVoIP Settings for V models Hardware Connection Calling via SIP ServersPeer-to-Peer VoIP DialPlan SIP Related FunctionVoice Call Status QoS DialPlan Setup Display NameSIP Related Function Setup Name@ Domain nameDetail explanation of the SIP and Port settings window Page John’s settings David’s settingsJohn calls David David calls JohnSIP URL 4321@draytel.org SIP Related Function Arnor’s settings Paulin’s settingsAre the Network Connection Settings on Your PC OK? Is the Hardware Status OK?Page Can You Ping the Router from PC? For WindowsAre the ISP Settings OK? For PPPoE UsersBack to Factory Default Setting For Pptp Users
Top Page Image Contents