Draytek manual Quick Install Your Vigor2100 Series Router, Hardware Installation

Page 14

2. Quick Install Your Vigor2100 Series Router

2.1 Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.

1.Connect the WAN interface to the external Cable/ADSL modem with a RJ-45 cable.

2.Connect one port of 4-port switch to your computer with a RJ-45 cable.

3.For Vigor2100VG/V, connect Phone port to a conventional analog telephone, either corded or wireless (DECT), with a RJ-11 cable.

4.For Vigor2100VG/V, connect Line port to land line jack with a RJ-11 cable.

5.Connect the attached power adapter to the power port.

6.Check the ACT and WAN, LAN LEDs to assure network connections. (Regarding the detailed LED status explanation, please refer to section 1.3)

Caution For Vigor2100VG/V, the FXS port can be connected to an analog phone only. Do not connect the FXS port to the telephone wall jack. This connection might damage your router.

8

Image 14
Contents Page Warranty Safety Instructions and ApprovalSafety Copyright InformationRegistered Owner Tools UpdatesBe a FirmwareEuropean Community Declarations Regulatory Information Table of Contents Introduction Brief Overview Specifications Front Panel LEDs and Rear Panel Interfaces Vigor2100VVigor2100G WlanVigor2100VG Package Contains Quick Install Your Vigor2100 Series Router Hardware InstallationConfigure Your Router via Quick Start Wizard Introduction Configure Your Router via Quick Start WizardPPPoE Pptp Static IP Review the summary of settings Wireless LAN Settingsfor G models General SettingsSecurity WPA WEPVoIP Settings for V models Hardware Connection Calling via SIP ServersVoice Call Status QoS Peer-to-PeerVoIP DialPlan SIP Related Function DialPlan Setup Display NameSIP Related Function Setup Name@ Domain nameDetail explanation of the SIP and Port settings window Page John calls David John’s settingsDavid’s settings David calls JohnSIP URL 4321@draytel.org SIP Related Function Arnor’s settings Paulin’s settingsAre the Network Connection Settings on Your PC OK? Is the Hardware Status OK?Page Can You Ping the Router from PC? For WindowsAre the ISP Settings OK? For PPPoE UsersBack to Factory Default Setting For Pptp Users