Draytek Vigor2100 manual Static IP

Page 18

client that will ask for the IP network settings from the DHCP server or PPTP-enabled DSL modem.

Specify an IP address: If you are not sure whether there are any DHCP services on the WAN interface, you can manually assign an IP address to the interface. Note that the IP Address and Subnet Mask should be assigned within the same network as the PPTP-enabled DSL modem.

Static IP

Enter the static (fixed or permanent) IP address that your ISP offers to you.

WAN IP address: this is the IP address assigned by your ISP for your router. You shall specify the IP address of the router here. e.g. 172.16.2.84

Subnet Mask: an address code that determines the size of the network; this is the subnet mask of the router, when seen by external users on the Internet (including your ISP). The subnet mask is provided by your ISP. e.g.

255.255.255.0

Gateway IP Address: an IP address forwards Internet traffic from your local area network (LAN) . e.g. 172.16.2.5

DNS Server IP address: you must specify DNS server IP address here if your ISP has the said address. If you do not specify it, the router will automatically apply default DNS Server IP address: 194.109.6.66 to this field.

DHCP Some Cable ISPs require user to provide or specify MAC address for access authentication purpose. Your can either manually enter the MAC address in the MAC Address fields or clone from your network adapter.

12

Image 18
Contents Page Warranty Safety Instructions and ApprovalSafety Copyright InformationRegistered Owner Tools UpdatesBe a FirmwareEuropean Community Declarations Regulatory Information Table of Contents Introduction Brief Overview Specifications Front Panel LEDs and Rear Panel Interfaces Vigor2100VVigor2100G WlanVigor2100VG Package Contains Quick Install Your Vigor2100 Series Router Hardware Installation Configure Your Router via Quick Start Wizard Introduction Configure Your Router via Quick Start WizardPPPoE Pptp Static IP Review the summary of settings Wireless LAN Settingsfor G models General SettingsSecurity WPA WEPVoIP Settings for V models Hardware Connection Calling via SIP ServersPeer-to-Peer VoIP DialPlan SIP Related FunctionVoice Call Status QoS DialPlan Setup Display NameSIP Related Function Setup Name@ Domain nameDetail explanation of the SIP and Port settings window Page John calls David John’s settingsDavid’s settings David calls JohnSIP URL 4321@draytel.org SIP Related Function Arnor’s settings Paulin’s settingsAre the Network Connection Settings on Your PC OK? Is the Hardware Status OK?Page Can You Ping the Router from PC? For WindowsAre the ISP Settings OK? For PPPoE UsersBack to Factory Default Setting For Pptp Users