|
| Blinking | The data is transmitting. |
| Right LED | On | The port is connected with 1000Mbps. |
| (Green) | Off | The port is disconnected with 10/100Mbps. |
LAN 2/3/4 | Left LED | On | The port is connected. |
(Green) | Off | The port is disconnected. | |
|
| Blinking | The data is transmitting. |
| Right LED | On | The port is connected with 100Mbps. |
| (Green) | Off | The port is disconnected with 10Mbps. |
WAN 2 | Left LED | On | The port is connected. |
(Green) | Off | The port is disconnected. | |
|
| Blinking | The data is transmitting. |
| Right LED | On | The port is connected with 100Mbps. |
| (Green) | Off | The port is disconnected with 10Mbps. |
Interface | Description |
WLAN | Push this button to enable (WLAN LED on) or disable (WLAN LED off) wireless |
| connection. |
Factory Reset | Restore the default settings. |
| Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more |
| than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, |
| release the button. Then the router will restart with the factory default configuration. |
Phone S0 | Connecter for ISDN phone(s) only via ISDN phone adapter. Do not connect any |
| other device to such port or connect ISDN line, otherwise the router might be |
| damaged. |
ISDN/Phone | Connecter for ISDN line or ISDN phone adapter in particular condition. Refer to |
S0 | section 2.2 for more details. |
Phone (1/2) | Connecter for PSTN phone. |
Line | Connector of analog phone for PSTN life line. |
LAN | Connecters for local networked devices. |
DSL | Connecter for accessing the Internet through ADSL2/2+. |
WAN 2 | Connecter for remote networked devices. |
USB | Connecter for a USB device (for 3G USB Modem or printer). |
PWR | Connecter for a power adapter. |
|
|
ON/OFF | Power Switch. |
|
|
11