Draytek 2820 Series quick start Backing to Factory Default Setting If Necessary, For MPoA Users

Page 39

For MPoA Users

1.Check if the Enable option is selected.

2.Check if DSL Modem Settings is set appropriately.

3.Check if IP Address, Subnet Mask and Gateway are set correctly (must identify with the values from your ISP) if you choose Specify an IP address.

4.5Backing to Factory Default Setting If Necessary

Sometimes, a wrong connection can be improved by returning to the default settings. Try to reset the router by software or hardware.

Warning: After pressing factory default setting, you will loose all settings you did before. Make sure you have recorded all useful settings before you pressing. The password of factory default is null.

Software Reset

You can reset the router to factory default via Web page.

Go to System Maintenance and choose Reboot System on the web page. The following screen will appear. Choose Using factory default configuration and click OK. After few seconds, the router will return all the settings to the factory settings.

35

Image 39
Contents Version Date 2007/07/24 Copyright Information Safety Instructions and ApprovalRegulatory Information European Community DeclarationsTable of Contents Definitions for Isdn Ports IntroductionFor Vigor2820 Panel ExplanationInterface Description For Vigor2820n Interface Description For Vigor2820Vn Interface Description For Vigor2820VS From VoIPPhone SettingsInterface Description For Vigor2820VSn Connection Package Content Hardware Installation Installing Your RouterIsdn Phone Adapter Installation Page Open Start-Settings- Printer and Faxes Printer InstallationPage Page Page Page Basic Configuration Configuring Web PagesPage Page Page Wireless Configuration Basic Wireless LAN ConceptGeneral Setup Page On the Wireless LAN group, select Security Settings Security SettingsPage Checking If the Hardware Status Is OK or Not Trouble ShootingFor Windows For MacOs For MacOs Terminal Pinging the Router from Your ComputerFor PPPoE Users Checking If the ISP Settings are OK or NotPage Backing to Factory Default Setting If Necessary Software ResetFor MPoA Users Hardware Reset Contacting Your Dealer