1.1.2 For Vigor2820n
| LED |
| Status | Explanation |
|
| |||
| ACT (Activity) |
| Blinking | The router is powered on and running normally. |
|
|
| Off | The router is powered off. |
| USB |
| On | A USB device is connected and active. |
|
|
| Blinking | The data is transmitting. |
| CSM |
| On | The profile of CSM (Content Security Management) for |
|
|
|
| IM/P2P application is active. (It is enabled from |
|
|
|
| Objects Setting >> CSM Profile). |
| WLAN |
| On | Wireless access point is ready. |
|
|
| Blinking | It will blink while wireless traffic goes through. |
| DSL |
| On | The router is ready to access Internet through DSL link. |
|
|
| Blinking | Slowly: The connection is ready. |
|
|
|
| Quickly: The connection is tranning. |
| WAN2 |
| On | The router is ready to access Internet through WAN |
|
|
|
| connection. |
|
|
| Blinking | It will blink while transmitting data. |
| DoS |
| On | The DoS/DDoS function is active. |
|
|
| Blinking | It will blink while deleting an attack. |
| VPN |
| On | The VPN tunnel is active. |
| QoS |
| On | The QoS function is active. |
| LED on Connector |
|
| |
|
|
|
|
|
| LAN 1(Giga) | Left LED | On | The port is connected. |
| (Green) | Off | The port is disconnected. | |
|
|
| Blinking | The data is transmitting. |
|
| Right LED | On | The port is connected with 1000Mbps. |
|
| (Green) | Off | The port is disconnected with 10/100Mbps. |
| LAN 2/3/4 | Left LED | On | The port is connected. |
| (Green) | Off | The port is disconnected. | |
|
|
| Blinking | The data is transmitting. |
|
| Right LED | On | The port is connected with 100Mbps. |
|
| (Green) | Off | The port is disconnected with 10Mbps. |
| WAN 2 | Left LED | On | The port is connected. |
| (Green) | Off | The port is disconnected. | |
|
|
| Blinking | The data is transmitting. |
|
| Right LED | On | The port is connected with 100Mbps. |
|
| (Green) | Off | The port is disconnected with 10Mbps. |
4