Draytek 2820 Series quick start

Page 32

field of Pre-Shared Key (PSK). WPA encrypts each frame transmitted from the radio using the Pre-Shared Key (PSK) which entered from this panel.

4.As to WEP encryption, select 64-bit or 128-bit as the encryption mode. For 64bits WEP key, type in 5 ASCII characters or 10 hexadecimal digitals leading by 0x, for example, ABCDE or 0x4142434445. And for 128bits WEP key, type in 13 ASCII characters or 26 hexadecimal digits leading by 0x, for example, ABCDEFGHIJKLM or 0x4142434445464748494A4B4C4D. Only one WEP key can be selected and allows user to type in the characters.

5.Click OK to save settings.

Be aware that for the communication, all wireless devices must support the same encryption bit length and share the same key. If WEP mode is selected, only one of four preset keys can be selected at one time.

28

Image 32
Contents Version Date 2007/07/24 Safety Instructions and Approval Copyright InformationEuropean Community Declarations Regulatory InformationTable of Contents Introduction Definitions for Isdn PortsPanel Explanation For Vigor2820Interface Description For Vigor2820n Interface Description For Vigor2820Vn Interface Description From VoIPPhone Settings For Vigor2820VSInterface Description For Vigor2820VSn Connection Package Content Installing Your Router Hardware InstallationIsdn Phone Adapter Installation Page Printer Installation Open Start-Settings- Printer and FaxesPage Page Page Page Configuring Web Pages Basic ConfigurationPage Page Page General Setup Wireless ConfigurationBasic Wireless LAN Concept Page Security Settings On the Wireless LAN group, select Security SettingsPage Trouble Shooting Checking If the Hardware Status Is OK or NotFor Windows For MacOs Pinging the Router from Your Computer For MacOs TerminalChecking If the ISP Settings are OK or Not For PPPoE UsersPage For MPoA Users Backing to Factory Default Setting If NecessarySoftware Reset Hardware Reset Contacting Your Dealer