Draytek 2820 Series quick start For Vigor2820Vn

1.1.3 For Vigor2820Vn

LED		Status	Explanation
ACT (Activity)		Blinking	The router is powered on and running normally.
		Off	The router is powered off.
USB		On	A USB device is connected and active.
		Blinking	The data is transmitting.
CSM		On	The profile of CSM (Content Security Management) for
			IM/P2P application is active. (It is enabled from
			Objects Setting >> CSM Profile).
WLAN		On	Wireless access point is ready.
		Blinking	It will blink while wireless traffic goes through.
DSL		On	The router is ready to access Internet through DSL link.
		Blinking	Slowly: The connection is ready.
			Quickly: The connection is tranning.
WAN 2	Left LED	On	The port is connected.
	(Green)	Off	The port is disconnected.
		Blinking	The data is transmitting.
	Right LED	On	The port is connected with 100Mbps.
	(Green)	Off	The port is disconnected with 10Mbps.
Line		On	Web Content Filter is disabled.
		Off	Web Content Filter is enabled to filter web pages.
Phone 1/2		On	The phone connected to this port is off-hook.
		Off	The phone connected to this port is on-hook.
		Blinking	A phone call comes.
LED on Connector
LAN 1(Giga)	Left LED	On	The port is connected.
	(Green)	Off	The port is disconnected.
		Blinking	The data is transmitting.
	Right LED	On	The port is connected with 1000Mbps.
	(Green)	Off	The port is disconnected with 10/100Mbps.
LAN 2/3/4	Left LED	On	The port is connected.
	(Green)	Off	The port is disconnected.
		Blinking	The data is transmitting.
	Right LED	On	The port is connected with 100Mbps.
	(Green)	Off	The port is disconnected with 10Mbps.
WAN 2	Left LED	On	The port is connected.
	(Green)	Off	The port is disconnected.
		Blinking	The data is transmitting.
	Right LED	On	The port is connected with 100Mbps.
	(Green)	Off	The port is disconnected with 10Mbps.

6