Eaton Electrical CA03310002E manual Overall Dimensions in Inches mm w x h x d, Mounting Positions

10	NEMA Contactors & Starters
	IT. Electro-Mechanical
		September 2003
	Technical Data and Specifications
	Table 6. Specifications

Description	Size 00, 0	Size 1	Size 2	Size 3, 4	Size 5
Overall Dimensions in Inches (mm) — w x h x d
Non-reversing	1.8 x 4.4 x 2.4	2.1 x 4.4 x 2.4	3.0 x 5.9 x 3.1	4.1 x 8.0 x 3.5	5.6 x 14.0 x 7.0
Contactor	(45 x 111 x 60)	(54 x 113 x 60)	(76 x 150 x 79)	(105 x 203 x 90)	(142 x 355 x 178)
Reversing	3.8 x 5.9 x 2.7	4.5 x 5.9 x 2.6	6.2 x 7.4 x 3.3	8.5 x 9.5 x 3.8	11.7 x 17.2 x 7.0
Contactor	(96 x 149 x 69)	(114 x 149 x 67)	(158 x 188 x 84)	(216 x 242 x 97)	(296 x 436 x 178)
Non-reversing	1.8 x 5.0 x 2.5	2.1 x 5.4 x 2.5	3.0 x 5.9 x 3.1	4.1 x 8.0 x 3.5	5.7 x 19.4 x 7.0
Starter	(45 x 127 x 63)	(54 x 138 x 63)	(76 x 150 x 79)	(105 x 203 x 90)	(145 x 492 x 178)
Reversing	3.8 x 5.9 x 2.7	4.5 x 5.9 x 2.6	6.2 x 7.4 x 3.3	8.5 x 9.5 x 3.8	11.8 x 21.0 x 7.0
Starter	(96 x 149 x 69)	(114 x 149 x 67)	(158 x 188 x 84)	(216 x 242 x 97)	(300 x 533 x 178)
Mounting Hole Spacing in Inches (mm) — w x h
Non-reversing	1.33 x 4.0	1.46 x 4.10	.94 x 2.87	1.33 x 4.13	1.75 x 13.0
Contactor	(33.8 x 101)	(37 x 104)	(24 x 73)	(33.8 x 105)	(44.5 x 330)
Reversing	3.15 x 5.35	3.15 x 5.35	5.51 x 6.89	7.87 x 9.06	7.82 x 13.0
Contactor	(80 x 136)	(80 x 136)	(140 x 175)	(200 x 230)	(198.5 x 330)
Non-reversing	1.33 x 4.62	1.46 x 5.04	.94 x 2.87	1.33 x 4.13	1.75 x 18.3
Starter	(33.8 x 117.3)	(37 x 128)	(24 x 73)	(33.8 x 105)	(44.5 x 465)
Reversing	3.15 x 5.35	3.15 x 5.35	5.51 x 6.89	7.87 x 9.06	7.82 x 18.3
Starter	(80 x 136)	(80 x 136)	(140 x 175)	(200 x 230)	(198.5 x 465)
Mounting Positions
Panel-Vertical	Yes	Yes	Yes	Yes	Yes
Panel-Horizontal	Yes	Yes	Yes	Yes	Yes
DIN Rail Mountable	Yes	Yes	Yes	No	No
Weights in Lb. (kg)
Non-reversing	.7	.9	2.8	6.7	20.0
Contactor	(.31)	(.42)	(1.27)	(3.05)	(9.1)
Reversing	1.9	2.6	6.9	16.9	48.0
Contactor	(.86)	(1.17)	(3.13)	(7.67)	(21.8)
Non-reversing	.9	1.2	2.9	7.1	27.0
Starter	(.40)	(.53)	(1.32)	(3.20)	(12.3)
Reversing	2.0	2.6	7.1	16.8	55.0
Starter	(.90)	(1.20)	(3.20)	(7.60)	(25.0)
Mechanical Operating Rate
Maximum	3/sec	3/sec	2/sec	2/sec	1/sec
Mechanical Life
	10,000,000	10,000,000	8,000,000	8,000,000	5,000,000
Humidity
	95% Non-condensing	95% Non-condensing	95% Non-condensing	95% Non-condensing	95% Non-condensing
Insulation Voltage (Ui)
	690V	690V	690V	690V	690V
Impulse Withstand Voltage (Uimp)
	6 kV	6 kV	6 kV	6 kV	6 kV

Auxiliaries add approximately 1.0" (25 mm) to depth for single, 1.2" (30 mm) for dual.

Non-reversing contactors and starters only.

No load condition.

Up to 99% humidity depending on application. Consult factory.

For more information visit: www.cutler-hammer.eaton.com CA03310002E