Eaton Electrical CA03310002E manual Catalog Number Selection Open Components, September, Examples

	NEMA Contactors & Starters	3
September 2003	IT. Electro-Mechanical
	Catalog Number Selection
Catalog Number Selection (Open Components)
Table 1. IT. Electro-Mechanical Catalog Numbering System

		N	101 B				S0 J 3	A
Standard
N = NEMA
										Overload Type
									A = Standard
									N = Contactor or Not Applicable
Configuration (Open Type)
02N = FVNR Coil Controller
03N = FVR Coil Controller
										Pole Selection
04N = Contact Block
05N = Solid-State Non-reversing Overload Relay									3 = 3-Pole
06N = Solid-State Reversing Overload Relay
101 = FVNR Starter
										Overload Full Amperes Adjustment
111 = FVNR Contactor
501 = FVR Starter									(45 mm)		(76 mm)
511 = FVR Contactor									A = .25 – .8		F = 5.0 – 16
									B = .59 – 1.9		H = 8.4 – 27
									C = 1.4 – 4.4		K = 14 – 45
									D = 2.8 – 9.0		N = 31 – 100
	Frame Width				Designator (NEMA)				G = 6.3 – 20
									J = 10 – 32
	B = 45 mm			SA = Size 00
									(54 mm)		(105 mm)
	C = 54 mm			S0		= Size 0
									A = .25 – .8		K = 14 – 45
	D = 76 mm			S1		= Size 1
									B = .59 – 1.9		M = 28 – 90
	E = 105 mm			S2		= Size 2
									C = 1.4 – 4.4		P = 42 – 135
	F = 140 mm			S3		= Size 3
									D = 2.8 – 9.0		R = 63 – 200
				S4		= Size 4
				S5		= Size 5			F = 5.0 – 16		(140 mm)
									H = 8.4 – 27
				XC = Coil Controller							P = 42 – 135
									L = 16 – 50
											S = 84 – 270
				XR = Overload
											T = 131 – 420
									X = Contact Block, Coil Controller,
									Contactor or Not Applicable

Note: When using the Catalog Numbering System for Eaton’s Cutler-Hammer IT. Electro-Mechanical products, care should be exercised to assure that the Catalog Number for the Overload Relay aligns with the IT. Contact Block selected for type, frame size and ampacity, if purchased as separate components.

Examples:

N101BS0J3A — Full Voltage Non-reversing, Size 0 Starter with a 10 – 32 amp overload range

N111FS5X3N — Full Voltage Non-reversing, Size 5 Contactor

N501DS2K3A — Full Voltage Reversing Starter with a 14 – 45 amp overload range

N02NCXCXNN — Coil Controller 54 mm

N04NBSAX3N — Contact Block Size 00

CA03310002E For more information visit: www.cutler-hammer.eaton.com