Mark Levinson 512 owner manual Play button Pause button Standby button, Next button

Page 15

Nº512 CD/SACD™ Player

7. Play button

8. Pause button

9. Standby button

Starts playback of a loaded CD or SACD disc. From a newly loaded

 

disc, pressing the Play button begins playback from the first track

 

on the disc. If the disc is in Pause mode, then pressing the Play

 

button resumes playback from the same point at which it was

 

paused.

 

If the Play button is pressed while the drawer is open, the drawer

 

closes and, if a disc was loaded, begins playing.

 

Some disc formats may not be supported by the Nº512 player. Refer

 

to the “Disc Compatability” section found earlier in the manual for

 

more information.

 

Irregular shaped discs are not supported by the Nº512 player;

 

however, mini 3” discs are acceptable so long as they can be seated

 

properly in the disc drawer.

 

Pressing the Pause button pauses the playback at that point within

 

the track. The far left side of the front panel display shows double

 

bars () to indicate that the player is in Pause mode.

 

To remove the player from Pause mode, press the Pause button

 

again or press the Play button. The double-bars symbol disappears

 

from the display and playback of the disc resumes from the point at

 

which it was paused.

11

 

Activates and deactivates the Standby mode. The Standby LED

 

located directly above the Standby button is illuminated when the

 

Nº512 is operational and blinks slowly when the Nº512 is in

 

Standby mode. To remove the Nº512 from Standby mode, press the

 

Standby, Drawer, or Play button.

 

10. Next button

Allows you to skip to the next track or to fast forward ( ) through the disc.

To skip a track – press the button once to advance to the beginning of the next track.

To fast forward – press and hold the button for longer than one second, then release. The Nº512 advances through the disc at twice the normal playback speed, while playing snippets of audio. Observe on the front panel display that a single arrow ( ) is displayed.

There are three fast forward speeds available - 2x speed, 4x speed, and 8x speed - and each selected speed is indicated by an additional arrow on the display. To increase the speed of the fast forward, press and hold the button for longer than one second, then release. Performing this operation multiple times scrolls through the fast forward settings - 2x, 4x, 8x, and then fast forward Off, which returns the Nº512 to normal playback mode.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Disc Player No512FCC Notice Iii Important Safety InstructionsMark Levinson Safety Terms & SymbolsTerms in This Manual Symbols on Product Documentation ConventionsTable of Contents Product Description IntroductionAvailable Options Product Registration Installation ConsiderationsWhat’s in the Box QuantityWith ground-lifter or cheater adapters. Doing so may cause PlacementVentilation Make Sure all components are properly grounded. Do notOperating States Power RequirementsReplacing the Remote Control Batteries To replace the remote control batteriesUnpacking Disc Compatibility Handling and Care of DiscsAbout CD-R/CD-RW Mark Levinson Front Panel Overview Time buttonRepeat button Front Panel Display and IR Receiver LED Indicators Display buttonStop button Next button Play button Pause button Standby buttonPrevious button Disc Drawer Drawer button 14. CD/SACD button Power button Front Panel Display Special Mode Indicator Track Number Time IndicatorNº512 CD/SACD Player Rear Panel Overview Analog OutputsDigital Outputs IR Input Trigger Input and Output AC Input RS-232 Control port Ethernet portRemote Control Overview Transport buttons Fast Rewind and Fast Forward buttonSACD/CD button Clear button Volume buttonsPrevious and Next buttons Program Button Shuffle Button Repeat button Mute buttonVolume Fix/Var button Set Up Using Analog to a Preamplifier Initial SetupSet Up Using Analog to an Amplifier No532 Power AmplifierNo512 CD/SACD Player Set Up Using Digital Outputs No502 Media Console No512 CD/SACD PlayerNo502 Media Console Mark Levinson Internal Web Network SetupComputer Requirements Material RequirementsTo Connect Without a Router Connecting the CablesNetwork Setup Parameters To Connect Using a Router O512 ComputerConnecting With Dhcp Recommended To change the host name of the Nº512 Setting Up ComputerNetwork Setup for Windows Connecting With Static IP Addressing To change the IP address of the Nº512 Direct Connection ML Net Masters and Slaves Connecting DevicesDiscovering Slaves No Power No Output Front Panel Display Not Working TroubleshootingNº512 CD/SACD Player Can’t Assign in ML Net No Response to Commands in ML Net Replacing the AC Mains Fuse Care & MaintenanceRestoring Factory Defaults Output Connectors SpecificationsManufacturer Declaration of Conformity

512 specifications

The Mark Levinson 512 is a high-performance audio digital-to-analog converter (DAC) that enhances the listening experience through its blend of cutting-edge technology and exquisite design. Known for its exceptional sound quality, the 512 is a flagship product within Mark Levinson's renowned line of audio equipment, appealing to audiophiles seeking the highest fidelity in music reproduction.

One of the standout features of the Mark Levinson 512 is its advanced DAC architecture. It utilizes a state-of-the-art ESS Sabre DAC chip, which is renowned for its low distortion and high dynamic range. This technology allows the 512 to deliver an unparalleled listening experience, reproducing music with incredible precision and clarity across a broad range of frequencies.

The 512 is designed to support a wide variety of digital audio formats, including PCM up to 32-bit/768kHz and DSD up to DSD128. This versatility ensures compatibility with virtually any audio source, from high-resolution streaming services to digital files stored on local devices. Audiophiles will appreciate the ability to experience their favorite music in formats that maximize sound quality.

Another notable characteristic of the Mark Levinson 512 is its robust and elegant housing. Constructed with premium materials, the 512 exudes luxury while providing durability. The intuitive user interface, complete with a full-color display, simplifies operation and enhances accessibility to its features. Users can easily navigate through options, making adjustments to settings with effortless precision.

The 512 also incorporates advanced connectivity options, including USB, coaxial, and optical inputs, ensuring seamless integration with modern audio systems. Its balanced XLR outputs contribute to reduced noise and interference, further elevating the audio quality.

Additionally, the Mark Levinson 512 features an innovative upsampling technology that converts lower-resolution audio files into higher resolutions in real-time. This results in enhanced audio clarity and detail, making even compressed music sound remarkable.

In summation, the Mark Levinson 512 is a quintessential component for any serious audiophile. With its exceptional DAC technology, high-resolution support, and elegant design, it stands as a testament to Mark Levinson’s dedication to creating high-fidelity audio products that deliver an extraordinary listening experience. Whether used in a home audio system or a professional setting, the 512 represents the pinnacle of digital audio performance.
Top Page Image Contents