Mark Levinson Set Up Using Digital Outputs, No502 Media Console No512 CD/SACD Player

Page 30

Set Up Using Digital

Outputs

Note

No512 CD/SACD Player

AES/EBU cable

No502 Media Console

26

No512 CD/SACD Player

SPDIF cable

No502 Media Console

Mark Levinson

To set up the Nº512 using the digital audio outputs, perform the following steps. Refer to the cabling diagram on the left, as needed.

When playing a SACD disc, the SACD layer is only available on the analog audio outputs. However, the CD layer may be played normally using digital or analog outputs.

1.Ensure that all components are powered off before making connections.

2.Connect an audio cable from the Nº512 rear panel Digital Output connector to the Digital Input connector on the preamplifier rear panel. S/PDIF or AES/EBU connectors may be used.

3.Turn on the Nº512 player.

4.Turn on the preamplifier.

5.Turn on the amplifier.

6.Do not proceed until all equipment has gone through its initialization process and is fully powered on.

7.On the Nº512, press the Drawer button on the front panel to open the CD drawer.

8.Place a CD in the drawer. Make sure that the disc is data-side down and seated properly in the drawer.

9.Press the Drawer button to close the drawer.

10.Press the Play button after the disc has loaded.

The first track should now be playing.

If you do not hear audible sound, refer to the “Troubleshooting” section found later in the manual for suggestions.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents No512 Disc PlayerFCC Notice Important Safety Instructions IiiDocumentation Conventions Safety Terms & SymbolsTerms in This Manual Symbols on Product Mark LevinsonTable of Contents Introduction Product DescriptionQuantity Installation ConsiderationsWhat’s in the Box Available Options Product RegistrationMake Sure all components are properly grounded. Do not PlacementVentilation With ground-lifter or cheater adapters. Doing so may causePower Requirements Operating StatesReplacing the Remote Control Batteries To replace the remote control batteriesUnpacking Disc Compatibility Handling and Care of DiscsAbout CD-R/CD-RW Mark Levinson Front Panel Overview Time buttonRepeat button Front Panel Display and IR Receiver LED Indicators Display buttonStop button Play button Pause button Standby button Next buttonPrevious button Disc Drawer Drawer button 14. CD/SACD button Power button Special Mode Indicator Track Number Time Indicator Front Panel DisplayNº512 CD/SACD Player Rear Panel Overview Analog OutputsDigital Outputs IR Input RS-232 Control port Ethernet port Trigger Input and Output AC InputRemote Control Overview Fast Rewind and Fast Forward button Transport buttonsVolume buttons SACD/CD button Clear buttonPrevious and Next buttons Shuffle Button Repeat button Mute button Program ButtonVolume Fix/Var button Initial Setup Set Up Using Analog to a PreamplifierSet Up Using Analog to an Amplifier No532 Power AmplifierNo512 CD/SACD Player Set Up Using Digital Outputs No502 Media Console No512 CD/SACD PlayerNo502 Media Console Mark Levinson Network Setup Internal WebMaterial Requirements Computer RequirementsTo Connect Using a Router O512 Computer Connecting the CablesNetwork Setup Parameters To Connect Without a RouterConnecting With Dhcp Recommended Setting Up Computer To change the host name of the Nº512Network Setup for Windows Connecting With Static IP Addressing To change the IP address of the Nº512 Direct Connection Masters and Slaves Connecting Devices ML NetDiscovering Slaves Troubleshooting No Power No Output Front Panel Display Not WorkingNº512 CD/SACD Player Can’t Assign in ML Net No Response to Commands in ML Net Care & Maintenance Replacing the AC Mains FuseRestoring Factory Defaults Specifications Output ConnectorsDeclaration of Conformity Manufacturer

512 specifications

The Mark Levinson 512 is a high-performance audio digital-to-analog converter (DAC) that enhances the listening experience through its blend of cutting-edge technology and exquisite design. Known for its exceptional sound quality, the 512 is a flagship product within Mark Levinson's renowned line of audio equipment, appealing to audiophiles seeking the highest fidelity in music reproduction.

One of the standout features of the Mark Levinson 512 is its advanced DAC architecture. It utilizes a state-of-the-art ESS Sabre DAC chip, which is renowned for its low distortion and high dynamic range. This technology allows the 512 to deliver an unparalleled listening experience, reproducing music with incredible precision and clarity across a broad range of frequencies.

The 512 is designed to support a wide variety of digital audio formats, including PCM up to 32-bit/768kHz and DSD up to DSD128. This versatility ensures compatibility with virtually any audio source, from high-resolution streaming services to digital files stored on local devices. Audiophiles will appreciate the ability to experience their favorite music in formats that maximize sound quality.

Another notable characteristic of the Mark Levinson 512 is its robust and elegant housing. Constructed with premium materials, the 512 exudes luxury while providing durability. The intuitive user interface, complete with a full-color display, simplifies operation and enhances accessibility to its features. Users can easily navigate through options, making adjustments to settings with effortless precision.

The 512 also incorporates advanced connectivity options, including USB, coaxial, and optical inputs, ensuring seamless integration with modern audio systems. Its balanced XLR outputs contribute to reduced noise and interference, further elevating the audio quality.

Additionally, the Mark Levinson 512 features an innovative upsampling technology that converts lower-resolution audio files into higher resolutions in real-time. This results in enhanced audio clarity and detail, making even compressed music sound remarkable.

In summation, the Mark Levinson 512 is a quintessential component for any serious audiophile. With its exceptional DAC technology, high-resolution support, and elegant design, it stands as a testament to Mark Levinson’s dedication to creating high-fidelity audio products that deliver an extraordinary listening experience. Whether used in a home audio system or a professional setting, the 512 represents the pinnacle of digital audio performance.
Top Page Image Contents