Mark Levinson 512 owner manual Care & Maintenance, Replacing the AC Mains Fuse

Page 45

Nº512 CD/SACD™ Player

Care & Maintenance

Note

Caution!

Replacing the AC Mains Fuse

The Nº512 requires routine care and maintenance to ensure optimal performance. The bulleted items indicate maintenance procedures that should be performed on a regular basis.

Failure to perform the maintenance procedures included in this section may void the manufacturer’s warranty and/or standard repair policies.

•To remove dust from the Nº512’s exterior surface, use a feather duster or a low-pressure blower.

•To remove dirt and fingerprints from the Nº512’s exterior surface, use a soft, lint-free cloth. DO NOT use metal polish or a cloth made with steel wool.

If needed, this cloth can be dampened with isopropyl alcohol. DO NOT dampen the cloth with benzene, acetone-based cleaners, or other commercial cleaners.

Wipe the Nº512’s exterior surface in the same direction as the grain of the brushed aluminum.

41

DO NOT apply liquid directly to the No512’s exterior surface. Doing so may damage electrical components.

Use these instructions to verify the condition of the fuse and to replace one that has blown.

1.Power down the Nº512.

2.Remove the power cord from the rear panel connector.

3.Use a small flat-bladed screwdriver to remove the fuse drawer from the AC Mains inlet.

4.Verify whether the fuse is good or blown.

5.Replace the fuse with a new one, if required. Verify that the new fuse matches the rating and size noted on the fuse label, located beside the AC Mains inlet on the rear panel of the Nº512.

6.Carefully slide the fuse drawer into the AC Mains inlet and press firmly in place.

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Disc Player No512FCC Notice Iii Important Safety InstructionsTerms in This Manual Symbols on Product Safety Terms & SymbolsDocumentation Conventions Mark LevinsonTable of Contents Product Description IntroductionWhat’s in the Box Installation ConsiderationsQuantity Available Options Product RegistrationVentilation PlacementMake Sure all components are properly grounded. Do not With ground-lifter or cheater adapters. Doing so may causeOperating States Power RequirementsReplacing the Remote Control Batteries To replace the remote control batteriesUnpacking Disc Compatibility Handling and Care of DiscsAbout CD-R/CD-RW Mark Levinson Front Panel Overview Time buttonRepeat button Front Panel Display and IR Receiver LED Indicators Display buttonStop button Next button Play button Pause button Standby buttonPrevious button Disc Drawer Drawer button 14. CD/SACD button Power button Front Panel Display Special Mode Indicator Track Number Time IndicatorNº512 CD/SACD Player Rear Panel Overview Analog OutputsDigital Outputs IR Input Trigger Input and Output AC Input RS-232 Control port Ethernet portRemote Control Overview Transport buttons Fast Rewind and Fast Forward buttonSACD/CD button Clear button Volume buttonsPrevious and Next buttons Program Button Shuffle Button Repeat button Mute buttonVolume Fix/Var button Set Up Using Analog to a Preamplifier Initial SetupSet Up Using Analog to an Amplifier No532 Power AmplifierNo512 CD/SACD Player Set Up Using Digital Outputs No502 Media Console No512 CD/SACD PlayerNo502 Media Console Mark Levinson Internal Web Network SetupComputer Requirements Material RequirementsNetwork Setup Parameters Connecting the CablesTo Connect Using a Router O512 Computer To Connect Without a RouterConnecting With Dhcp Recommended To change the host name of the Nº512 Setting Up ComputerNetwork Setup for Windows Connecting With Static IP Addressing To change the IP address of the Nº512 Direct Connection ML Net Masters and Slaves Connecting DevicesDiscovering Slaves No Power No Output Front Panel Display Not Working TroubleshootingNº512 CD/SACD Player Can’t Assign in ML Net No Response to Commands in ML Net Replacing the AC Mains Fuse Care & MaintenanceRestoring Factory Defaults Output Connectors SpecificationsManufacturer Declaration of Conformity

512 specifications

The Mark Levinson 512 is a high-performance audio digital-to-analog converter (DAC) that enhances the listening experience through its blend of cutting-edge technology and exquisite design. Known for its exceptional sound quality, the 512 is a flagship product within Mark Levinson's renowned line of audio equipment, appealing to audiophiles seeking the highest fidelity in music reproduction.

One of the standout features of the Mark Levinson 512 is its advanced DAC architecture. It utilizes a state-of-the-art ESS Sabre DAC chip, which is renowned for its low distortion and high dynamic range. This technology allows the 512 to deliver an unparalleled listening experience, reproducing music with incredible precision and clarity across a broad range of frequencies.

The 512 is designed to support a wide variety of digital audio formats, including PCM up to 32-bit/768kHz and DSD up to DSD128. This versatility ensures compatibility with virtually any audio source, from high-resolution streaming services to digital files stored on local devices. Audiophiles will appreciate the ability to experience their favorite music in formats that maximize sound quality.

Another notable characteristic of the Mark Levinson 512 is its robust and elegant housing. Constructed with premium materials, the 512 exudes luxury while providing durability. The intuitive user interface, complete with a full-color display, simplifies operation and enhances accessibility to its features. Users can easily navigate through options, making adjustments to settings with effortless precision.

The 512 also incorporates advanced connectivity options, including USB, coaxial, and optical inputs, ensuring seamless integration with modern audio systems. Its balanced XLR outputs contribute to reduced noise and interference, further elevating the audio quality.

Additionally, the Mark Levinson 512 features an innovative upsampling technology that converts lower-resolution audio files into higher resolutions in real-time. This results in enhanced audio clarity and detail, making even compressed music sound remarkable.

In summation, the Mark Levinson 512 is a quintessential component for any serious audiophile. With its exceptional DAC technology, high-resolution support, and elegant design, it stands as a testament to Mark Levinson’s dedication to creating high-fidelity audio products that deliver an extraordinary listening experience. Whether used in a home audio system or a professional setting, the 512 represents the pinnacle of digital audio performance.
Top Page Image Contents