Mark Levinson 512 owner manual Initial Setup, Set Up Using Analog to a Preamplifier

Page 28

Set Up Using Analog to a Preamplifier

SINGLE-ENDED ANALOG

No512 CD/SACD Player

Left - RCA

Right - RCA

No502 Media Console

24

BALANCED ANALOG

No512 CD/SACD Player

XLR - Left

Right - XLR

No502 Media Console

Mark Levinson

Initial Setup

The player can be connected using either analog or digital outputs. Use the appropriate setup procedure below.

To set up the Nº512 using the analog audio outputs into a preamplifier, perform the following steps. Refer to the cabling diagram on the left, as needed.

1.Ensure that all components are powered off before making connections.

2.Connect an audio cable from the Nº512 rear panel Analog Output Right connector to the Analog Input Right connector on the preamplifier rear panel. RCA or XLR connectors may be used.

3.Connect an audio cable from the Nº512 rear panel Analog Output Left connector to the Analog Input Left connector on the preamplifier rear panel. RCA or XLR connectors may be used.

4.Turn on the Nº512 player.

5.Turn on the preamplifier.

6.Turn on the amplifier.

7.Do not proceed until all equipment has gone through its initialization process and is fully powered on.

8.On the Nº512, press the Drawer button on the front panel to open the CD drawer.

9.Place a CD or SACD disc in the drawer. Make sure that the disc is data-side down and seated properly in the drawer.

10.Press the Drawer button to close the drawer.

11.Press the Play button after the disc has loaded.

The first track should now be playing.

If you do not hear audible sound, refer to the “Troubleshooting” section found later in the manual for suggestions.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents No512 Disc PlayerFCC Notice Important Safety Instructions IiiSafety Terms & Symbols Terms in This Manual Symbols on ProductDocumentation Conventions Mark LevinsonTable of Contents Introduction Product DescriptionInstallation Considerations What’s in the BoxQuantity Available Options Product RegistrationPlacement VentilationMake Sure all components are properly grounded. Do not With ground-lifter or cheater adapters. Doing so may causePower Requirements Operating StatesTo replace the remote control batteries Replacing the Remote Control BatteriesUnpacking Handling and Care of Discs Disc CompatibilityAbout CD-R/CD-RW Mark Levinson Time button Front Panel OverviewRepeat button Display button Front Panel Display and IR Receiver LED IndicatorsStop button Play button Pause button Standby button Next buttonPrevious button Disc Drawer Drawer button 14. CD/SACD button Power button Special Mode Indicator Track Number Time Indicator Front Panel DisplayNº512 CD/SACD Player Analog Outputs Rear Panel OverviewDigital Outputs IR Input RS-232 Control port Ethernet port Trigger Input and Output AC InputRemote Control Overview Fast Rewind and Fast Forward button Transport buttonsVolume buttons SACD/CD button Clear buttonPrevious and Next buttons Shuffle Button Repeat button Mute button Program ButtonVolume Fix/Var button Initial Setup Set Up Using Analog to a PreamplifierNo532 Power Amplifier Set Up Using Analog to an AmplifierNo512 CD/SACD Player No502 Media Console No512 CD/SACD Player Set Up Using Digital OutputsNo502 Media Console Mark Levinson Network Setup Internal WebMaterial Requirements Computer RequirementsConnecting the Cables Network Setup ParametersTo Connect Using a Router O512 Computer To Connect Without a RouterConnecting With Dhcp Recommended Setting Up Computer To change the host name of the Nº512Network Setup for Windows Connecting With Static IP Addressing To change the IP address of the Nº512 Direct Connection Masters and Slaves Connecting Devices ML NetDiscovering Slaves Troubleshooting No Power No Output Front Panel Display Not WorkingNº512 CD/SACD Player Can’t Assign in ML Net No Response to Commands in ML Net Care & Maintenance Replacing the AC Mains FuseRestoring Factory Defaults Specifications Output ConnectorsDeclaration of Conformity Manufacturer

512 specifications

The Mark Levinson 512 is a high-performance audio digital-to-analog converter (DAC) that enhances the listening experience through its blend of cutting-edge technology and exquisite design. Known for its exceptional sound quality, the 512 is a flagship product within Mark Levinson's renowned line of audio equipment, appealing to audiophiles seeking the highest fidelity in music reproduction.

One of the standout features of the Mark Levinson 512 is its advanced DAC architecture. It utilizes a state-of-the-art ESS Sabre DAC chip, which is renowned for its low distortion and high dynamic range. This technology allows the 512 to deliver an unparalleled listening experience, reproducing music with incredible precision and clarity across a broad range of frequencies.

The 512 is designed to support a wide variety of digital audio formats, including PCM up to 32-bit/768kHz and DSD up to DSD128. This versatility ensures compatibility with virtually any audio source, from high-resolution streaming services to digital files stored on local devices. Audiophiles will appreciate the ability to experience their favorite music in formats that maximize sound quality.

Another notable characteristic of the Mark Levinson 512 is its robust and elegant housing. Constructed with premium materials, the 512 exudes luxury while providing durability. The intuitive user interface, complete with a full-color display, simplifies operation and enhances accessibility to its features. Users can easily navigate through options, making adjustments to settings with effortless precision.

The 512 also incorporates advanced connectivity options, including USB, coaxial, and optical inputs, ensuring seamless integration with modern audio systems. Its balanced XLR outputs contribute to reduced noise and interference, further elevating the audio quality.

Additionally, the Mark Levinson 512 features an innovative upsampling technology that converts lower-resolution audio files into higher resolutions in real-time. This results in enhanced audio clarity and detail, making even compressed music sound remarkable.

In summation, the Mark Levinson 512 is a quintessential component for any serious audiophile. With its exceptional DAC technology, high-resolution support, and elegant design, it stands as a testament to Mark Levinson’s dedication to creating high-fidelity audio products that deliver an extraordinary listening experience. Whether used in a home audio system or a professional setting, the 512 represents the pinnacle of digital audio performance.
Top Page Image Contents