Mark Levinson Set Up Using Analog to an Amplifier, No512 CD/SACD Player, No532 Power Amplifier

Page 29

Nº512 CD/SACD™ Player

Set Up Using Analog to an Amplifier

SINGLE-ENDED ANALOG

No512 CD/SACD Player

Left - XLR

Right - XLR

No532 Power Amplifier

Warning!

BALANCED ANALOG

No512 CD/SACD Player

Left - RCA

Right

RCA

No532 Power Amplifier

To set up the Nº512 using the analog audio outputs directly into an amplifier, perform the following steps. Refer to the cabling diagram on the left, as needed.

1.Ensure that all components are powered off before making connections.

2.Connect an audio cable from the Nº512 rear panel Analog Output Right connector to the Analog Input Right connector on the amplifier rear panel. RCA or XLR connectors may be used.

3.Connect an audio cable from the Nº512 rear panel Analog Output Left connector to the Analog Input Left connector on the amplifier rear panel. RCA or XLR connectors may be used.

4.Turn on the Nº512 player.

5.Verify that the Volume level is NOT set to Fixed - the Volume Fixed LED on the front panel should NOT be illuminated.

Since the volume and mute controls are NOT active when the volume is set to Fixed, you will have no way to turn the volume down when a disc is played.

6. Turn on the amplifier.

25

7.Do not proceed until all equipment has gone through its initialization process and is fully powered on.

8.On the Nº512, press the Drawer button on the front panel to open the CD drawer.

9.Place a CD or SACD disc in the drawer. Make sure that the disc is data-side down and seated properly in the drawer.

10.Press the Drawer button to close the drawer.

11.Decrease the volume level to a suitable setting. The default value is 30.

12.Press the Play button after the disc has loaded.

The first track should now be playing.

If you do not hear audible sound, refer to the “Troubleshooting” section found later in the manual for suggestions.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Disc Player No512FCC Notice Iii Important Safety InstructionsTerms in This Manual Symbols on Product Safety Terms & SymbolsDocumentation Conventions Mark LevinsonTable of Contents Product Description IntroductionWhat’s in the Box Installation ConsiderationsQuantity Available Options Product RegistrationVentilation PlacementMake Sure all components are properly grounded. Do not With ground-lifter or cheater adapters. Doing so may causeOperating States Power RequirementsUnpacking Replacing the Remote Control BatteriesTo replace the remote control batteries About CD-R/CD-RW Disc CompatibilityHandling and Care of Discs Mark Levinson Repeat button Front Panel OverviewTime button Stop button Front Panel Display and IR Receiver LED IndicatorsDisplay button Next button Play button Pause button Standby buttonPrevious button Disc Drawer Drawer button 14. CD/SACD button Power button Front Panel Display Special Mode Indicator Track Number Time IndicatorNº512 CD/SACD Player Digital Outputs IR Input Rear Panel OverviewAnalog Outputs Trigger Input and Output AC Input RS-232 Control port Ethernet portRemote Control Overview Transport buttons Fast Rewind and Fast Forward buttonSACD/CD button Clear button Volume buttonsPrevious and Next buttons Program Button Shuffle Button Repeat button Mute buttonVolume Fix/Var button Set Up Using Analog to a Preamplifier Initial SetupNo512 CD/SACD Player Set Up Using Analog to an AmplifierNo532 Power Amplifier No502 Media Console Mark Levinson Set Up Using Digital OutputsNo502 Media Console No512 CD/SACD Player Internal Web Network SetupComputer Requirements Material RequirementsNetwork Setup Parameters Connecting the CablesTo Connect Using a Router O512 Computer To Connect Without a RouterConnecting With Dhcp Recommended To change the host name of the Nº512 Setting Up ComputerNetwork Setup for Windows Connecting With Static IP Addressing To change the IP address of the Nº512 Direct Connection ML Net Masters and Slaves Connecting DevicesDiscovering Slaves No Power No Output Front Panel Display Not Working TroubleshootingNº512 CD/SACD Player Can’t Assign in ML Net No Response to Commands in ML Net Replacing the AC Mains Fuse Care & MaintenanceRestoring Factory Defaults Output Connectors SpecificationsManufacturer Declaration of Conformity

512 specifications

The Mark Levinson 512 is a high-performance audio digital-to-analog converter (DAC) that enhances the listening experience through its blend of cutting-edge technology and exquisite design. Known for its exceptional sound quality, the 512 is a flagship product within Mark Levinson's renowned line of audio equipment, appealing to audiophiles seeking the highest fidelity in music reproduction.

One of the standout features of the Mark Levinson 512 is its advanced DAC architecture. It utilizes a state-of-the-art ESS Sabre DAC chip, which is renowned for its low distortion and high dynamic range. This technology allows the 512 to deliver an unparalleled listening experience, reproducing music with incredible precision and clarity across a broad range of frequencies.

The 512 is designed to support a wide variety of digital audio formats, including PCM up to 32-bit/768kHz and DSD up to DSD128. This versatility ensures compatibility with virtually any audio source, from high-resolution streaming services to digital files stored on local devices. Audiophiles will appreciate the ability to experience their favorite music in formats that maximize sound quality.

Another notable characteristic of the Mark Levinson 512 is its robust and elegant housing. Constructed with premium materials, the 512 exudes luxury while providing durability. The intuitive user interface, complete with a full-color display, simplifies operation and enhances accessibility to its features. Users can easily navigate through options, making adjustments to settings with effortless precision.

The 512 also incorporates advanced connectivity options, including USB, coaxial, and optical inputs, ensuring seamless integration with modern audio systems. Its balanced XLR outputs contribute to reduced noise and interference, further elevating the audio quality.

Additionally, the Mark Levinson 512 features an innovative upsampling technology that converts lower-resolution audio files into higher resolutions in real-time. This results in enhanced audio clarity and detail, making even compressed music sound remarkable.

In summation, the Mark Levinson 512 is a quintessential component for any serious audiophile. With its exceptional DAC technology, high-resolution support, and elegant design, it stands as a testament to Mark Levinson’s dedication to creating high-fidelity audio products that deliver an extraordinary listening experience. Whether used in a home audio system or a professional setting, the 512 represents the pinnacle of digital audio performance.
Top Page Image Contents