CyberPower Systems RMCARD201 manual CyberPower Network Management System

Page 8

CyberPower Network Management System

If the response is shown as below, the IP address is already in use by other equipment. Try another IP address until an available address is found.

8

Image 8

Contents CyberPower Network Management System Rev.1.2 Hardware and Tool Installations Setup the IP address for the Snmp CardIP setup using Snmp Card Configuration Tool program Main dialog of the Snmp Card Configuration Tool programAuthentication dialog Web Browser II. IP setup using Command Line command Select an IP Address for CyberPower Network Management Card Locate the subnet of CyberPower Network Management CardCyberPower Network Management System