CyberPower Systems Network Management Card user manual CyberPower Network Management System

Page 14

CyberPower Network Management System

[System] menu contains, [System Time] page [User Accounts] page and [Identification] page.

[System Time] allows users to configure the internal time of the Network Management Card

1.Enter the date and time and choose either Celsius or Fahrenheit for the temperature display.

2.Click [Apply] to activate the settings.

[User Accounts] sets up user accounts. The system allows one administrator and two device users to access the system. An administrator can access all of the management menus. A device user can only access [Monitoring], [Events], and [Summary]. Only one user at a time can enter into the web browser.

1.Select [Administrator] / [Device User] and enter the User Name and Password.

2.Click [Apply]. – Are steps 2 and 3 in the correct order?

3.Retype the password to confirm the password was keyed properly.

12

Image 14
Contents User’s Manual Network Management Card Table of Contents Introduction Unpacking Description Installation Guide Snmp card setting window Method 2 Use DOS Mode Setting Configuration Guide CyberPower Network Management System Return to AC-On line power UPS CyberPower Network Management System CyberPower Network Management System CyberPower Network Management System CyberPower Network Management System Red:Severe CyberPower Network Management System CyberPower Network Management System Overview CyberPower Network Management System