Lincoln Electric CV-400-I manual CV Power Source to a K867, Adapter

WARNING

Turn off input power to the Welding Power Source using the disconnect switch at the fuse box Before connecting the wire feeder.

F-4

CV/CV-I

POWER SOURCE

CV-400-I + -

14PIN AMPHENOL

K867 UNIVERSAL ADAPTER PLUG

ELECTRIC	Only qualified persons should install, use or
SHOCK	service this machine.		N.C.
CAN KILL
	81	NOT USED ON CV/CV-I POWER SOURCES
	82
	SPARE
	2	CONNECT TOGETHER FOR
	4	WELDING OUTPUT	N.D.
	41	42 VAC
	42		N.E.
	31
		115 VAC	N.F.
	32
		POWER SOURCE FRAME CONNECTION
	GND
	21	WIRE FEEDER VOLTMETER CONNECTION

CV POWER SOURCE TO A K867

DIAGRAMS

TO WORK	77	CONNECTS TO (WORK TERMINAL) OF POWER SOURCE
		10K
ELECTRODE CABLE	76		REMOTE OUTPUT CONTROL
	75	MIN.	N.F.

UNIVERSAL

N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF",

REVERSE ELECTRODE AND WORK CABLES AT POWER SOURCE. N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY.

N.D. FOR WIRE FEEDERS THAT RETURN A SIGNAL FOR WELDING OUTPUT, USE ISOLATION RELAY TO CLOSE LEADS 2 & 4.

N.E. REFER TO POWER SOURCE INSTRUCTION MANUAL FOR MAXIMUM AUXILIARY CURRENT DRAW.

N.F. NOT PRESENT ON ALL MACHINES

{

TO 2

K867

4

TO WIRE FEEDER

6-18-93

S20658

ADAPTER

F-4