Dell PC2748, PC2708 Starting the Application, PowerConnect Switch Management Buttons Description

Page 40

Table 5-3. PowerConnect Switch Management Buttons

Button	Description

Apply Changes	Applies changes to the Ethernet Switch.
Refresh	Refreshes Ethernet Switch information.
Print	Prints the Network Management System page or table
	information.

Starting the Application

1Open a Web browser.

2Enter the Ethernet Switch IP address (the default IP address is: 192.168.2.1) in the address bar and press <Enter>.

For information about assigning an IP address to the Ethernet Switch, see "Viewing System IP Address."

3When the Enter Network Password window opens, enter a user name and password.

NOTE: The Ethernet switch is configured with a default IP address, user login and password. Activating the Managed Mode button recovers the factory default setting (no password). For information about recovering a lost password, see "Managed Mode Button".

NOTE: Passwords are both case-sensitive and alphanumeric.

4Click OK.

The Dell PowerConnect OpenManage Switch Administrator home page opens.

40

Image 40

Contents User’s Guide October Contents Using the Dell OpenManage Switch Administrator Viewing Statistics Contents System Description IntroductionGigabit Ethernet Ports 24 1-Gigabit Ethernet Ports + 2 SFP Combo ports 16 1-Gigabit Ethernet Ports48 1-Gigabit Ethernet Ports Features General FeaturesHead of Line Blocking Prevention Management ModesVirtual Cable Testing VCT Auto NegotiationJumbo Frames Support AutoMDI/MDIX SupportMAC Address Supported Features Layer 2 FeaturesVlan Supported Features Class of Service CoS FeaturesEthernet Switch Management Features Port Default SettingsPage Switch Port Configurations Hardware DescriptionPowerConnect 2708 Back Panel PowerConnect 2724 Back Panel PowerConnect 2748 Back Panel Physical Dimensions Power LEDManaged Mode LED LED DefinitionsPort LEDs Fan LED 2748 only10/100/1000BASE-T Port LEDs Managed Mode Button SFP Port LEDSwitch Ventilation Fan Cables, Port Connections, and Pinout Information1000BASE-T Cable Requirements RJ-45 Connections for 10/100/1000BASE-T PortsSFP Ports Internal Power Supply Connector Power ConnectorsPin Connections for SFP Interfaces Installation Precautions Installing the Dell PowerConnectOverview Site Requirements SafetyUnpacking Handling Static Sensitive Devices Package ContentsUnpacking the Device Mounting the Device Installing the Device Installing the Device in a RackInstalling the Device on a Flat Surface Installing the Device on a WallConnecting the Device to AC Power Supply Mounting Device on a WallConnecting the Device to the Network Back Panel Power ConnectorViewing Switch Operation Starting and Configuring the Dell PowerConnectInitial Configuration Login Screen Click Apply Changes Page Using the Dell OpenManage Switch Administrator Understanding the InterfaceInterface Components Description PowerConnect Switch Management Buttons Using the OpenManage Switch Administrator ButtonsInformation Buttons PowerConnect Switch Management Buttons Description Starting the ApplicationResetting the Device ResetDisplaying Configuration on Demand Defining Switch Information Configuring System InformationViewing the Switch Status Defining Switch Information Viewing System IP AddressUpdating Static IP Address IP AddressingConfiguring Dhcp Client Defining Interface Configuration Interface ConfigurationPage Open the Interface Configuration Configuring the InterfaceViewing Jumbo Frames Creating Vlan Membership Enabling Jumbo FramesDefining Vlan Interface Settings Showing/Creating VLANsRemoving VLANs Open the Vlan MembershipUpdating the Vlan Interface Settings Configuring LAG MembershipOpen the Vlan Interface Settings Open the LAG Aggregation Configuration Adding a Port to a LAGManaging System Files Downloading Files From Server Downloading Files from ServerFile Download PowerConnect 2748 Switch Configuration Firmware DownloadConfiguration Download Uploading FilesOpen the File Upload to Server Copying FilesRestoring Company Factory Default Settings Click Restore Company Factory Defaults Click Apply ChangesLocal User Database Assigning Access Level User RightsOpen the Local User Database Adding a User to the Local User Database Integrated Cable Test for Copper CablesDeleting a User from the Local User Database Open the Integrated Cable Test Running Integrated Cable TestClick Test Now Displaying Optical Transceivers Diagnostics Test Results Optical Transceivers DiagnosticsOpen the Optical Transceiver Diagnostics Port Mirroring Click show AllAdding a Port Mirroring Session Open the Port MirroringConfiguring Storm Control on the PowerConnect Enabling Storm ControlModifying PowerConnect 2708 Storm Control Port Parameters Configuring Storm Control on the PowerConnect 2716/2724Following describes Storm Control for PowerConnect Modifying PowerConnect 2748 Storm Control Port Parameters Quality of Service QoS Overview Configuring Quality of ServiceVPT Tag Classification Information CoS Services Defining CoS Settings Configuring QoS SettingsConfiguring the Trust Mode Mapping CoS Values to QueuesMapping a CoS value to a Queue Mapping Dscp Values to QueuesMapping a Dscp value and assigning priority queue Page Viewing Statistics Rmon StatisticsViewing Interface Statistics Open the Rmon StatisticsGlossary Class of Service Duplex ModeBroadcast Storm Dhcp ClientFlow Control FragmentFrame Gigabit EthernetIngress Port IP AddressJumbo Frames LayerManaged Mode MAC LayerMask MulticastPage Startup Configuration SwitchQoS RouterUnicast TrunkingWildcard Mask