Dell PC2716, PC2748, PC2708, PC2724 manual Configuring Dhcp Client

Page 46

Configuring DHCP Client

1Open the IP Addressing page.

2Change the DHCP to Enable.

3Click Apply Changes.

The switch requests from the DHCP server to assign a new dynamic IP Address, Subnet Mask, and Default Gateway Address to manage the device. The dynamic DHCP IP Address, DHCP Subnet Mask, and DHCP Default Gateway Address are displayed.

NOTE: The displayed values are not configured to the device. Record the updated dynamic fields.

4Check the box for Apply DHCP Address.

NOTE: The new dynamic DHCP IP Address, DHCP Subnet Mask, and DHCP Default Gateway Address received from the DHCP server are saved and configured in the device only after the Apply Changes button is clicked on. A reset-to-Default recovers the device default configuration.

5Click Apply Changes.

The new dynamic DHCP Address is configured in the switch.

6Enter the new DHCP Address in the Browser address line. The switch is reconnected to the new DHCP client address.

46

Image 46

Contents User’s Guide October Contents Using the Dell OpenManage Switch Administrator Viewing Statistics Contents System Description IntroductionGigabit Ethernet Ports 24 1-Gigabit Ethernet Ports + 2 SFP Combo ports 16 1-Gigabit Ethernet Ports48 1-Gigabit Ethernet Ports Head of Line Blocking Prevention FeaturesGeneral Features Management ModesJumbo Frames Support Virtual Cable Testing VCTAuto Negotiation AutoMDI/MDIX SupportMAC Address Supported Features Layer 2 FeaturesVlan Supported Features Class of Service CoS FeaturesEthernet Switch Management Features Port Default SettingsPage Switch Port Configurations Hardware DescriptionPowerConnect 2708 Back Panel PowerConnect 2724 Back Panel PowerConnect 2748 Back Panel Managed Mode LED Physical DimensionsPower LED LED DefinitionsPort LEDs Fan LED 2748 only10/100/1000BASE-T Port LEDs Managed Mode Button SFP Port LED1000BASE-T Cable Requirements Switch Ventilation FanCables, Port Connections, and Pinout Information RJ-45 Connections for 10/100/1000BASE-T PortsSFP Ports Internal Power Supply Connector Power ConnectorsPin Connections for SFP Interfaces Installation Precautions Installing the Dell PowerConnectOverview Site Requirements SafetyUnpacking Handling Static Sensitive Devices Package ContentsUnpacking the Device Mounting the Device Installing the Device Installing the Device in a RackInstalling the Device on a Flat Surface Installing the Device on a WallConnecting the Device to AC Power Supply Mounting Device on a WallConnecting the Device to the Network Back Panel Power ConnectorViewing Switch Operation Starting and Configuring the Dell PowerConnectInitial Configuration Login Screen Click Apply Changes Page Using the Dell OpenManage Switch Administrator Understanding the InterfaceInterface Components Description PowerConnect Switch Management Buttons Using the OpenManage Switch Administrator ButtonsInformation Buttons PowerConnect Switch Management Buttons Description Starting the ApplicationResetting the Device ResetDisplaying Configuration on Demand Defining Switch Information Configuring System InformationViewing the Switch Status Defining Switch Information Viewing System IP AddressUpdating Static IP Address IP AddressingConfiguring Dhcp Client Defining Interface Configuration Interface ConfigurationPage Open the Interface Configuration Configuring the InterfaceViewing Jumbo Frames Creating Vlan Membership Enabling Jumbo FramesRemoving VLANs Defining Vlan Interface SettingsShowing/Creating VLANs Open the Vlan MembershipUpdating the Vlan Interface Settings Configuring LAG MembershipOpen the Vlan Interface Settings Open the LAG Aggregation Configuration Adding a Port to a LAGManaging System Files Downloading Files From Server Downloading Files from ServerFile Download PowerConnect 2748 Switch Configuration Firmware DownloadConfiguration Download Uploading FilesOpen the File Upload to Server Copying FilesRestoring Company Factory Default Settings Click Restore Company Factory Defaults Click Apply ChangesLocal User Database Assigning Access Level User RightsOpen the Local User Database Adding a User to the Local User Database Integrated Cable Test for Copper CablesDeleting a User from the Local User Database Open the Integrated Cable Test Running Integrated Cable TestClick Test Now Displaying Optical Transceivers Diagnostics Test Results Optical Transceivers DiagnosticsOpen the Optical Transceiver Diagnostics Adding a Port Mirroring Session Port MirroringClick show All Open the Port MirroringConfiguring Storm Control on the PowerConnect Enabling Storm ControlModifying PowerConnect 2708 Storm Control Port Parameters Configuring Storm Control on the PowerConnect 2716/2724Following describes Storm Control for PowerConnect Modifying PowerConnect 2748 Storm Control Port Parameters Quality of Service QoS Overview Configuring Quality of ServiceVPT Tag Classification Information CoS Services Defining CoS Settings Configuring QoS SettingsConfiguring the Trust Mode Mapping CoS Values to QueuesMapping a CoS value to a Queue Mapping Dscp Values to QueuesMapping a Dscp value and assigning priority queue Page Viewing Statistics Rmon StatisticsViewing Interface Statistics Open the Rmon StatisticsGlossary Broadcast Storm Class of ServiceDuplex Mode Dhcp ClientFrame Flow ControlFragment Gigabit EthernetJumbo Frames Ingress PortIP Address LayerMask Managed ModeMAC Layer MulticastPage QoS Startup ConfigurationSwitch RouterUnicast TrunkingWildcard Mask