Dell PC2716, PC2748, PC2708, PC2724 manual Creating Vlan Membership, Enabling Jumbo Frames

Page 50

Current — Shows what the current status is for Jumbo Frames support.

After Reset — Indicates the Jumbo Frames status after the next time the switch is powered on.

Enabling Jumbo Frames

1Open the Jumbo Frames page.

2Select Enabled in the Jumbo Frames field.

3Click Apply Changes.

The Jumbo Frames are enabled on the device after power cycling.

Creating VLAN Membership

The VLAN Membership page contains a port table for assigning ports to VLANs. Ports are assigned VLAN membership by toggling through the Port Control settings.

The VLAN Membership page contains fields for defining VLAN groups. The switch supports the mapping of 4094 VLAN IDs up to 64 VLANs.

The VLAN Membership page also displays the VLAN ID currently defined and enables to statically create a new VLAN. To open the page, click VLAN Membership in the tree view.

Figure 6-5. VLAN Membership

Ports can have the following values:

T — The interface is a member of a VLAN. All packets forwarded by the interface are tagged. These packets contain VLAN information.

U — The interface is a VLAN member. Packets forwarded by the interface are untagged.

50

Image 50

Contents User’s Guide October Contents Using the Dell OpenManage Switch Administrator Viewing Statistics Contents Gigabit Ethernet Ports IntroductionSystem Description 48 1-Gigabit Ethernet Ports 16 1-Gigabit Ethernet Ports24 1-Gigabit Ethernet Ports + 2 SFP Combo ports Head of Line Blocking Prevention FeaturesGeneral Features Management ModesJumbo Frames Support Virtual Cable Testing VCTAuto Negotiation AutoMDI/MDIX SupportMAC Address Supported Features Layer 2 FeaturesVlan Supported Features Class of Service CoS FeaturesEthernet Switch Management Features Port Default SettingsPage Switch Port Configurations Hardware DescriptionPowerConnect 2708 Back Panel PowerConnect 2724 Back Panel PowerConnect 2748 Back Panel Managed Mode LED Physical DimensionsPower LED LED Definitions10/100/1000BASE-T Port LEDs Fan LED 2748 onlyPort LEDs Managed Mode Button SFP Port LED1000BASE-T Cable Requirements Switch Ventilation FanCables, Port Connections, and Pinout Information RJ-45 Connections for 10/100/1000BASE-T PortsSFP Ports Pin Connections for SFP Interfaces Power ConnectorsInternal Power Supply Connector Overview Installing the Dell PowerConnectInstallation Precautions Unpacking SafetySite Requirements Unpacking the Device Package ContentsHandling Static Sensitive Devices Mounting the Device Installing the Device Installing the Device in a RackInstalling the Device on a Flat Surface Installing the Device on a WallConnecting the Device to AC Power Supply Mounting Device on a WallConnecting the Device to the Network Back Panel Power ConnectorInitial Configuration Starting and Configuring the Dell PowerConnectViewing Switch Operation Login Screen Click Apply Changes Page Using the Dell OpenManage Switch Administrator Understanding the InterfaceInterface Components Description Information Buttons Using the OpenManage Switch Administrator ButtonsPowerConnect Switch Management Buttons PowerConnect Switch Management Buttons Description Starting the ApplicationResetting the Device ResetDisplaying Configuration on Demand Viewing the Switch Status Configuring System InformationDefining Switch Information Defining Switch Information Viewing System IP AddressUpdating Static IP Address IP AddressingConfiguring Dhcp Client Defining Interface Configuration Interface ConfigurationPage Viewing Jumbo Frames Configuring the InterfaceOpen the Interface Configuration Creating Vlan Membership Enabling Jumbo FramesRemoving VLANs Defining Vlan Interface SettingsShowing/Creating VLANs Open the Vlan MembershipOpen the Vlan Interface Settings Configuring LAG MembershipUpdating the Vlan Interface Settings Open the LAG Aggregation Configuration Adding a Port to a LAGManaging System Files Downloading Files From Server Downloading Files from ServerFile Download PowerConnect 2748 Switch Configuration Firmware DownloadConfiguration Download Uploading FilesOpen the File Upload to Server Copying FilesRestoring Company Factory Default Settings Click Restore Company Factory Defaults Click Apply ChangesOpen the Local User Database Assigning Access Level User RightsLocal User Database Deleting a User from the Local User Database Integrated Cable Test for Copper CablesAdding a User to the Local User Database Click Test Now Running Integrated Cable TestOpen the Integrated Cable Test Open the Optical Transceiver Diagnostics Optical Transceivers DiagnosticsDisplaying Optical Transceivers Diagnostics Test Results Adding a Port Mirroring Session Port MirroringClick show All Open the Port MirroringConfiguring Storm Control on the PowerConnect Enabling Storm ControlModifying PowerConnect 2708 Storm Control Port Parameters Configuring Storm Control on the PowerConnect 2716/2724Following describes Storm Control for PowerConnect Modifying PowerConnect 2748 Storm Control Port Parameters VPT Tag Classification Information Configuring Quality of ServiceQuality of Service QoS Overview CoS Services Defining CoS Settings Configuring QoS SettingsConfiguring the Trust Mode Mapping CoS Values to QueuesMapping a Dscp value and assigning priority queue Mapping Dscp Values to QueuesMapping a CoS value to a Queue Page Viewing Statistics Rmon StatisticsViewing Interface Statistics Open the Rmon StatisticsGlossary Broadcast Storm Class of ServiceDuplex Mode Dhcp ClientFrame Flow ControlFragment Gigabit EthernetJumbo Frames Ingress PortIP Address LayerMask Managed ModeMAC Layer MulticastPage QoS Startup ConfigurationSwitch RouterWildcard Mask TrunkingUnicast