CyberPower Systems CPS3000PIE user manual Do Not Use For Medical Or Life Support Equipment

Page 4
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT!

CPS3000PIE

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT!

DO NOT use in any circumstance that would affect operation or safety of any life support equipment or with any medical applications or patient care.

DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire or

electric shock, do not use with or near an aquarium. Condensation from the aquarium can cause the unit to short out.

DO NOT USE WITH LASER PRINTERS! The power demands of these devices will overload and possibly damage the unit.

DO NOT INSTALL THE EPS WHERE IT WOULD BE EXPOSED TO DIRECT SUNLIGHT OR NEAR HEAT!

DO NOT BLOCK OFF VENTILATION OPENINGS IN THE EPS’S HOUSING!

DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS HAIR DRYERS TO EPS OUTPUT SOCKETS.

SAFETY:

EN62040-1-1

EMI:

Conducted Emission: IEC/EN 62040-2…Category C2

Radiated Emission: IEC/EN 62040-2……Category C2

Harmonic Current: IEC/EN61000-3-2

Voltage Fluctuations and Flicker: IEC/EN61000-3-3

EMS:

IEC/EN61000-4-2(ESD)

IEC/EN61000-4-3(RS)

IEC/EN61000-4-4(EFT)

IEC/EN61000-4-5(lightning surge)

IEC/EN61000-2-2 (Immunity to low frequency signals)

3

Image 4
Contents CPS3000PIE USER MANUAL K01-0000010-00TABLE OF CONTENTS SAFETY AND EMC INSTRUCTIONS………….……………………………………….………1EPS STATUS INQUIRY AND FUNCTIONS SETUP…….……………………………………8 FAULT WARNING DISPLAY AND ALARM……………………………………….………10SAFETY AND EMC INSTRUCTIONS SAVE THESE INSTRUCTIONS K01-0000010-00DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT HARDWARE INSTALLATION GUIDE UNPACKINGAUTOMATIC VOLTAGE REGULATOR INSTALLING YOUR EPSDESCRIPTION 7. Battery Input Wiring Fault LED8. Bypass Switch 9. Power SwitchInstallation Guide 10. Power On Indicator12. LCD Display Toggle / Selected Switch 11. LCD Module DisplayREPLACING THE BATTERY DEFINITIONS FOR ILLUMINATED LCD ELECTRICAL SHOCKEPS Status Inquiry and Functions Setup 1. General ModeItems 2. Set-up ModeUnit FAULT WARNING DISPLAY AND ALARM SolutionCondition 1. Wait for the backlight to turn offTROUBLESHOOTING ProblemSolution Possible CauseTECHNICAL SPECIFICATIONS External BatteryModel CPS3000PIE