CyberPower Systems CPS3000PIE user manual Replacing The Battery, Step

Page 8
REPLACING THE BATTERY

CPS3000PIE

6.If the battery box or the battery connection has a switch, please turn it on first.

7.Turn on the BATTERY SW. on the back of the machine (Step 5)

Step 5

Step 6

8.Make the AC input connection and turn on the Power Switch on the front panel. The Power On Indicator and the LCD Module Display will blink 4 times. Press the Display toggle (Selected Switch) once. The output voltage showing on the LCD Module Display should be 220V. This completes the start-up process. (Step 6)

9.Press and hold the Display toggle switch for 4 seconds. The machine will begin a self test and enter Battery Mode for 6 seconds before returning to Line Mode. Correct any issues that may be present before continuing. See the Definitions for illuminated LCD on page 7 for a list of alarm code definitions.

10.After ensuring the machine works normally, reassemble the back cover. The installation is now complete.

11.When the external battery needs to be maintained or replaced remember to turn the machine off. Once off, remove the AC power source and switch off the BATTERY SW. before maintenance or replacing the batteries. When the work is complete, please start from Step 3 to re-install the machine.

REPLACING THE BATTERY

CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery. Battery service should only be done by qualified professionals.

CAUTION! Use only the specified type and number of external batteries. Please see the technical specifications for replacement batteries.

CAUTION! The battery may present a risk of electrical shock. Do not dispose of battery in a fire as it may explode. Follow all local ordinances regarding proper disposal of batteries. Most retailers that sell lead-acid batteries collect used batteries for recycling.

CAUTION! Do not open or mutilate the batteries. Released electrolyte is harmful to skin and eyes and may be toxic.

7

Image 8
Contents CPS3000PIE USER MANUAL K01-0000010-00TABLE OF CONTENTS SAFETY AND EMC INSTRUCTIONS………….……………………………………….………1EPS STATUS INQUIRY AND FUNCTIONS SETUP…….……………………………………8 FAULT WARNING DISPLAY AND ALARM……………………………………….………10SAFETY AND EMC INSTRUCTIONS SAVE THESE INSTRUCTIONS K01-0000010-00DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT HARDWARE INSTALLATION GUIDE UNPACKINGAUTOMATIC VOLTAGE REGULATOR INSTALLING YOUR EPSDESCRIPTION 7. Battery Input Wiring Fault LED8. Bypass Switch 9. Power SwitchInstallation Guide 10. Power On Indicator12. LCD Display Toggle / Selected Switch 11. LCD Module DisplayREPLACING THE BATTERY DEFINITIONS FOR ILLUMINATED LCD ELECTRICAL SHOCKEPS Status Inquiry and Functions Setup 1. General ModeUnit 2. Set-up ModeItems FAULT WARNING DISPLAY AND ALARM SolutionCondition 1. Wait for the backlight to turn offTROUBLESHOOTING ProblemSolution Possible CauseTECHNICAL SPECIFICATIONS External BatteryModel CPS3000PIE