KitchenAid 8301169 Before you start, Your safety and the safety of others are very important

Page 2

Before you start...

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”. These words mean:

DANGER

You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT: Observe all governing codes and ordinances.

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch.

Do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

NOTE: The range cooktop is manufactured for use with Natural gas. To convert to L.P./Propane gas, see the Gas Conversion instructions provided in literature package.

Proper gas and electrical supply connections must be available. See “Gas supply requirements,” Page 4 and “Electrical requirements,” Page 5.

IMPORTANT: Observe all governing codes and ordinances.

Do not obstruct flow of combustion and ventilation air.

Proper installation is your responsibility. Have a qualified technician install this range. Make sure you have everything necessary for correct installation. It is the installer's responsibility to comply with the installation clearances specified on the gas information label. The gas information label and model/serial rating plate are located on the surface below the control panel.

This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 — latest edition* or CAN/CGA — B149 — latest edition* installation codes.

It is the customer’s responsibility:

To contact a qualified electrical installer.

To assure that electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA

70 — latest edition**, or CSA Standard,

C22.1 Canadian Electrical Code, Part 1

— latest edition*, and all local codes and ordinances.

Cabinet opening dimensions shown must be used. Given dimensions are minimum clearances.

When installing a range under existing cabinets and installation does not meet the minimum cabinet clearances, install a range hood above the range to avoid burn hazards.

NOTE: Some cabinet and building materials are not designed to withstand the heat produced by the oven for baking and self-cleaning. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.

All openings in the wall or floor where the range is to be installed must be sealed. It is recommended that a range hood be installed above this range.

Copies of the standards listed may be obtained from:

*CSA International

8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575

**National Fire Protection Association One Batterymarch Park

Quincy, Massachusetts 02269

2

Image 2
Contents Backguard Questions regarding featuresService? Call 1-800-422-1230 or visit Operation, performance, parts orYour safety and the safety of others are very important Before you startParts supplied for installation Observe all governing codes and ordinances Gas supply requirementsGas Installation Electrical requirementsGrounded neutral Ungrounded neutralRegulatorflexible connector Remove cardboard or hardboard from under rangeInstalling the grille or griddle Lift the log burner up out of the bay and set asideElectronic Ignition System initial lighting If you need service Installer checkoff listMaintenance If range Does not operateCooktop schematic Oven schematic Page Instructions d’installation DosseretAvant de commencer Votre sécurité et celle des autres est très importanteDimensions de l’espace DimensionsPour l’installation ’installationPropane GAZ NaturelInstallation électrique Réparations sont nécessaires. Ne pas couper le conduitAvertissement Avertissement Conducteur neutre non relié à La terreConducteur neutre relié à La terre Conducteurs rouges Conducteurs blancInstallation du gril ou de la plaque à frire Installation du grilBrûleurs du gril Entretien Liste de contrôle de l’installateurSi vous avez besoin de services de réparation Si la cuisinière ne fonctionne pasL1 NEU Vert Préparé par KitchenAid, Benton Harbor, Michigan Schéma de la table de cuissonSchéma du four

8301169 specifications

The KitchenAid 8301169 is a versatile and essential tool for any kitchen enthusiast looking to enhance their cooking and baking experiences. Renowned for its robust construction and user-friendly design, this kitchen appliance highlights KitchenAid's commitment to quality and innovation.

One of the standout features of the KitchenAid 8301169 is its powerful motor, which delivers exceptional performance while mixing, kneading, or whipping ingredients. This motor is designed to handle even the thickest doughs with ease, ensuring consistent results every time. Its multipurpose design makes it perfect for a variety of culinary tasks, from preparing bread and pastries to whipping cream or blending sauces.

The appliance comes equipped with a user-friendly control panel that allows for precise speed adjustments. This flexibility is crucial for achieving the desired consistency in your mixtures, whether you are mixing delicate ingredients or heavy batters. The KitchenAid 8301169 also boasts a tilt-head design, which provides easy access to the mixing bowl and makes it simple to change attachments or scrape down the sides.

In terms of included accessories, the KitchenAid 8301169 features various attachments that enhance its versatility. This often includes a flat beater for general mixing, a dough hook for kneading, and a wire whip for aerating ingredients. Each tool is engineered for optimal performance, making it easier to create a range of recipes with professional results.

The build quality of the KitchenAid 8301169 is impressive, featuring a die-cast metal construction that not only adds durability but also adds a touch of elegance to kitchen decor. Its premium finish is easy to clean and maintains its appearance over time, making it a long-lasting addition to your culinary arsenal.

Another notable characteristic is the appliance's compatibility with a wide array of KitchenAid attachments, allowing for even greater functionality. From food grinders to pasta makers, these attachments can expand the capabilities of the KitchenAid 8301169, making it an all-in-one solution for various cooking needs.

Overall, the KitchenAid 8301169 combines performance, style, and innovation, making it a must-have for both amateur cooks and seasoned chefs. Its blend of power, versatility, and durable construction ensures it will be a valued partner in the kitchen for years to come. Whether you're preparing family meals or experimenting with new recipes, this appliance is equipped to meet the culinary challenges head-on.