Gas supply requirements

to range

WARNING

Explosion Hazard

Use a new AGA or CSA approved gas supply line.

Install a shutoff valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (35.6 cm) water column.

Examples of a qualified person include:

Licensed heating personnel, Authorized gas company personnel, and

Authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: Range cooktop must be connected to a regulated gas supply.

A.This installation must conform with local codes and ordinances. In the absence of local codes, installations must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 — latest edition* or CAN/CGA-B149 — latest edition* installation codes.

C. The range is equipped for use with NATURAL gas. It is design-certified by International Approval Services (I.A.S.) for NATURAL and L.P. gases with appropriate conversion. The model/serial rating plate, located on the surface below the control panel, has information on the type of gas that can be used. If this information does not agree with the type of gas available, check with the local gas supplier.

L.P. Gas:

No attempt shall be made to convert the cooktop from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. Conversion must be done by a qualified service technician. To convert to L.P. gas, use L.P. gas conversion kit part no. 8301439. The parts for this kit are in the literature package supplied with range.

D. Provide a gas supply line of 3/4" (1.9 cm) rigid pipe to the range location. A smaller size pipe on long runs may result in insufficient gas supply. Pipe-joint compounds, appropriate for use with L.P. gas, must be used. With L.P. gas, piping or tubing size can be 1/2" (1.3 cm) minimum. L.P. gas suppliers usually determine the size and materials used on the system.

E. If local codes permit, a new AGA or CSA design-certified, 4-5 foot (122-

152.4cm) long, 5/8" (1.6 cm) I.D., flexible metal appliance connector is recommended for connecting this range to the gas supply line. Do not kink or damage the flexible tubing when moving the range. A 1/2" (1.3 cm) male pipe thread is needed for connection to pressure regulator female pipe threads.

G. If rigid pipe is used as a gas supply line, a combination of pipe fittings must be used to obtain an in-line connection to the range. All strains must be removed from the supply and fuel lines so range will be level and in line.

H.The regulator must be checked at a minimum 1-inch (25.4 mm) water column above the set pressure. The inlet pressure to the regulator should be as follows for operation and checking the regulator setting:

NATURAL GAS: Manifold pressure –

5 inches (12.7 cm) W.C. Maximum pressure –

14 inches (35.6 cm) W.C.

L.P. GAS:

Manifold pressure –

10 inches (25.4 cm) W.C. Maximum pressure –

14 inches (35.6 cm) W.C.

I. Line pressure testing:

Testing above 1/2 psi (3.5 kPa) (gauge): The range and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures greater than 1/2 psig (3.5 kPa).

Testing at 1/2 psi (3.5 kPa) (gauge)

or lower: The range must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa).

B. Input ratings shown on the model/serial rating plate are for elevations up to 2,000 feet (610 m). For elevations above 2,000 feet (610 m), ratings are reduced at a rate of 4% for each 1,000 feet (305 m) above sea level. (Not applicable for Canada.)

shutoff valve “open” position

gas supply line

F.The supply line shall be equipped with an approved shutoff valve. This valve should be located in the same room, but external to the range, and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve.

Copies of the standards listed may be obtained from:

*CSA International

8501 East Pleasant Valley Road Cleveland, Ohio 44131-5575

8301169 specifications

The KitchenAid 8301169 is a versatile and essential tool for any kitchen enthusiast looking to enhance their cooking and baking experiences. Renowned for its robust construction and user-friendly design, this kitchen appliance highlights KitchenAid's commitment to quality and innovation.

One of the standout features of the KitchenAid 8301169 is its powerful motor, which delivers exceptional performance while mixing, kneading, or whipping ingredients. This motor is designed to handle even the thickest doughs with ease, ensuring consistent results every time. Its multipurpose design makes it perfect for a variety of culinary tasks, from preparing bread and pastries to whipping cream or blending sauces.

The appliance comes equipped with a user-friendly control panel that allows for precise speed adjustments. This flexibility is crucial for achieving the desired consistency in your mixtures, whether you are mixing delicate ingredients or heavy batters. The KitchenAid 8301169 also boasts a tilt-head design, which provides easy access to the mixing bowl and makes it simple to change attachments or scrape down the sides.

In terms of included accessories, the KitchenAid 8301169 features various attachments that enhance its versatility. This often includes a flat beater for general mixing, a dough hook for kneading, and a wire whip for aerating ingredients. Each tool is engineered for optimal performance, making it easier to create a range of recipes with professional results.

The build quality of the KitchenAid 8301169 is impressive, featuring a die-cast metal construction that not only adds durability but also adds a touch of elegance to kitchen decor. Its premium finish is easy to clean and maintains its appearance over time, making it a long-lasting addition to your culinary arsenal.

Another notable characteristic is the appliance's compatibility with a wide array of KitchenAid attachments, allowing for even greater functionality. From food grinders to pasta makers, these attachments can expand the capabilities of the KitchenAid 8301169, making it an all-in-one solution for various cooking needs.

Overall, the KitchenAid 8301169 combines performance, style, and innovation, making it a must-have for both amateur cooks and seasoned chefs. Its blend of power, versatility, and durable construction ensures it will be a valued partner in the kitchen for years to come. Whether you're preparing family meals or experimenting with new recipes, this appliance is equipped to meet the culinary challenges head-on.